Sony DVCAM DSR-60P Operating Instructions Manual page 38

Changing Menu Settings
3
Use the ≥ button or ˘ button to select a desired
item.
Example: Display when "DISPLAY CONTROL" is selected
SETUP MENU
REPEAT FUNCTION
OPERATIONAL FUNCTION
DISPLAY CONTROL
a)
TIME CODE
MENU GRADE :BASIC
Monitor screen
4
Press the [B]÷ button.
This displays the menu level 2 for the menu item
selected in step 3.
Example: Level-2 display for "DISPLAY CONTROL"
SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY :ON
CHARA.POSITION
CHARA.TYPE :WHITE
DISPLAY INFO :T&STA
SUB STATUS :OFF
MENU DISPLAY :WHITE
PEAK HOLD :OFF
OVER DISP HOLD :OFF
BRIGHTNESS :100%
ALARM :ON
Monitor screen
5
Press the ≥ or ˘ button to select the item whose
setting you wish to change.
For menu items with a level 3, press the [B] ÷
button to go to the level 3, then press the ≥ or ˘
button to select the item whose setting you wish to
change.
Example: Display when "BRIGHTNESS" is selected
SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY :ON
CHARA.POSITION
CHARA.TYPE :WHITE
DISPLAY INFO :T&STA
SUB STATUS :OFF
MENU DISPLAY :WHITE
PEAK HOLD :OFF
OVER DISP HOLD :OFF
BRIGHTNESS :100%
ALARM :ON
Monitor screen
38
Chapter 4 Menu Settings
Display
Time counter display
a) DSR-60 only.
> Chara disp
Time counter display
Current settings
> Brightness
Time counter display
6
Press the [B] ÷ button.
This causes all of the settings under the item
selected in step 5 to be displayed.
SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :100%
* 100%
66%
33%
Monitor screen
7
Press the ≥ button or ˘ button to change the
setting.
SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :33%
* 100%
66%
33%
Monitor screen
8
To change other settings, press the ¿ [A] button
to return to the previous screen, then repeat steps 5
to 7 as required.
9
When you have completed the settings, press the
SET (YES) [MARK] button.
The message "NOW SAVING..." is displayed on
the monitor screen and "Saving..." is shown on the
time counter display while the new settings are
being saved to the unit's memory.
After the saving operation is completed, the
monitor screen and time counter display return to
their usual state.
>> 100%
Time counter display
>> 33%
Time counter display