Edit A Memory Channel - AOR AR-DV10 Operating Manual

Hide thumbs Also See for AR-DV10:
Table of Contents

Advertisement

7.5.

EDIT A MEMORY CHANNEL

A memory channel which already contains a saved frequency, can be edited as follows:
1.
Press [MENU] and use the [▶] button to go to [MEM] and press [ENT]
2.
Use the [▶] button to go to [CH EDIT] and press [ENT] twice.
3.
Use the keypad to enter the bank number and channel number, followed by [ENT]. For
ex. [0110] + [ENT] for bank 01 and channel 10.
4.
To edit any of the parameters, just use the [▶] button to highlight the parameter to
change, and press [ENT] to edit as follows:
BANK-CH: Use the keypad to enter the bank number and
channel number, followed by
ex. [0110] + [ENT] for bank 01 and channel 10.
FREQ:
Use the keypad to enter the frequency in MHz,
followed by [ENT].
MODE:
Rotate the dial selector knob to select the
desired demodulation mode, and
[ENT].
IFBW:
Rotate the dial selector knob to select the
desired IF bandwidth, and press
PASS:
Rotate the dial selector knob to toggle the
frequency pass ON or OFF, and press [ENT]. If set to ON, this
memory channel will be ignored when its memory bank is
T:
Input a name as described in chapter 10.3 "INPUT CHARACTERS &
SYMBOLS".
PROTECT: Rotate the dial selector knob to toggle the protect ON or OFF, and press
[ENT]. If set to ON, this memory channel cannot be erased.
(on page 2/2)
SQL N/L:
Rotate the dial selector knob to chose between
LEVEL, NOISE or AUTO squelch.
SQL TYPE: Rotate the dial selector knob to chose between
CTCSS, DCS, reverse tone and OFF.
CTCSS:
Rotate the dial selector knob to set the CTCSS
tone frequency manually, or in automatic
discovery mode (SRCH), or OFF.
: Rotate the dial selector knob to set the DCS
DCS CODE
tone
discovery mode (SRCH), or OFF.
AGC:
Rotate the dial selector knob to set automatic gain control to FAST, MID, SLOW
or RF-G.
Set the offset frequency function as described in chapter 10.8 "OFFSET
OFFSET F.:
RECEPTION".
V.SCR:
Set the voice descrambler function as described in chapter 10.6 "ANALOG
VOICE
DESCRAMBLER"
code
manually,
[ENT]. For
press
[ENT].
or
in
automatic
32
scanned.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents