Table of Contents
Advertisement
[VFO]
FM15
[D]
2
DSTR
[Au]
20k
VFO-A XXXX.XXX XX
VFO-B XXXX.XXX XX
-------------------
00-00 XXXX.XXX XX
3
BANK.T (bank title)
CH.T (channel title)
00 XXXX.XXX XX
BANK.T (bank title)
UPPER SIDE→
LOWER SIDE→
Memory channel readout mode
Operation mode
[VFO]： VFO
[MEM]： Memory channel readout
[SCN]： Scan
[SER]： Search
Demodulation mode and IF bandwidth in kHz or Hz.
FM100, FM30, FM15, FM6 (kHz)
AM15, AM8, AM5.5, AM3.8 (kHz)
USB2.6, USB1.8, LSB2.6, LSB1.8 (kHz)
CW500, CW200 (Hz)
IF bandwidths for digital modes: FM30, FM15, FM6 (kHz)
Digital demodulation is activated.
Digital mode which has been set or which has been
automatically detected by the receiver.
DSTR: D-STAR
YAES:
YAESU (C4FM)
DMR:
DMR (Tier 1 / Tier 2 / MOTOTRBO)
D-CR:
Japanese D-CR & NXDN (6.25k)
dPMR: dPMR (446 Tier 1)
ALIN:
ALINCO (EJ47U)
P-25:
APCO25 (Phase 1)
T-DM:
TETRA (Direct mode, mobile to mobile)
Auto-detection of digital modes is activated. (Except Tetra)
Frequency step in kHz.
Step-adjust value (when activated) is shown in section 5.
Receive frequency (In MHz over 3MHz and in kHz below
3MHz. The VFO of the upper line is the one currently
received.
For memory channel readout and scan modes, the bank and
channel numbers are displayed on the upper side. The bank
and channel titles are on the lower side.
For search mode, the bank number is displayed on the upper
side. The bank title is on the lower side.
11
----------------------
Search mode
Hide quick links:
Advertisement
Table of Contents
