Table of Contents
Advertisement
3.
Use [▶] to select any of the following categories on
which you would like to perform data COPY, MOVE or
ERASE:
SEARCH BANK: For an entire search bank.
SEARCH GRP: For a search group.
4.
Press [ENT] and rotate the dial selector to chose
either:
COPY: To copy data
MOVE: To move data (the original will be lost)
DEL: To delete data
5.
Press [ENT] to enter the data input screen.
6.
Using the dial selector, select either the data to be
erased, or the data to be copied or moved to a target
location and go to the next selection with the [▶] key.
7.
Once you have entered all the data, initiate the
copy/move/erase procedure by selecting: [XXX
EXEC] and press [ENT].
◯ 「WRITING MEMORY...」will be displayed for a short
time until the procedure is over.
How to erase pass frequencies:
1.
Press [MENU].
2.
Use [▶] to select [EDIT] and press [ENT].
3.
Use [▶] to select [PASS FREQ] and press [ENT]
twice.
4.
Use the dial selector knob to select the bank number,
for which you want to erase pass frequencies.
5.
Now you have two choices. Either erase just one
pass frequency, or all pass frequencies for this bank
number.
Just one:
Use [▶] to select line [F.NO] and rotate the dial
selector knob to select the memory channel number of the unwanted pass frequency.
Use [▶] to select line [DEL EXEC] and press [ENT].
All:
Use [▶] to select line [DEL 1PF/ALL] and rotate the dial selector knob to select [ALL]
Use [▶] to select line [DEL EXEC] and press [ENT].
◯ 「WRITING MEMORY...」will be displayed for a short time until the procedure is over.
.
42
Hide quick links:
Advertisement
Table of Contents
