Table of Contents
Advertisement
The tuning step value can be changed as follows:
1.
Press [MENU], then [ENT].
2.
Use [▶] to select [STEP], then press [ENT]
3.
Use the arrows [◀] or [▶] to select the desired step and validate with [ENT].
5.9.
STEP-ADJUST
This function is useful in the case of a special frequency array where the received frequency
is not divisible by the step frequency. Step-adjust allows to adjust the step accordingly.
The following example describes a situation of a 20kHz frequency step which needs to be
adjusted by 10kHz.
439.00
20kHz step
439.01
The step-adjust value can be set as follows:
Press [MENU], then [ENT].
Use [▶] to select [STEP ADJ], then press [ENT]
Note that there are 3 pages for values from
0.05kHz up to 250kHz. Select 0Hz to disable the
function.
Note that there are 3 pages for values from 10Hz
←
up to 500kHz.
439.02
439.04
439.03
10kHz step-adjust
439.06
439.05
439.07
24
439.08
439.10
439.09
Hide quick links:
Advertisement
Table of Contents
