Auto Sequence; Spot Out - Clover HDV043 Instruction Manual

4-2. Auto Sequence

• Auto Loss Skip : If there is no video input, it skip video loss channel.
• Display time : Select a display duration while sequencing (1 sec. ~30 sec.)
[Note] Sequence doesn't work on event pop-up.

4-3. Spot Out

Control extra spot output on rear panel. By using additional monitor, event triggered video
display and sequence display are available.
[1] Mode
• Sequence : Display videos in selected time order per channel.
• Event : Display event triggered channel.
• Seq+Event : If an event is triggered, the video is displayed first and then in sequence.
[2] Display Time : Set time per channel applied in sequence display.
47 | P a g e