Clover HDV043 Instruction Manual page 4

When strange noise or smell is sensed,
immediately plug out and send inquiry to
service center or seller.
Do not install the device in any place where
strong magnetic flow, electric wavelength and
vibration may be sensed or where radio, TV or
other wireless device is located. Keep the
device away from magnetic flow, electric wave
or vibration.
Strong shockwave or vibration may be the
cause of mechanic disorder. Please be careful.
Check if power switch and record on the front
side of the product is still turned on.
4 | P a g e
Do not install device in humid place filled with
dust. It might be the cause of electrocution and
fire.
Caution
Do not put anything heavy on the product.
Otherwise it may be the cause of disorder.
Be careful so that anything conductive may not
fall into the ventilation hole. Otherwise it may
be the cause of disorder.
When HDD is overloaded,you change the
setting to keep recording. In that case, check if
it would be OK to eliminate the saved data.