Clover HDV043 Instruction Manual page 110

4. Internet Explorer Version 7 and later
The monitoring by the web browser is available as the web server is built in the DVR.
Initial Connection
If you have actual TCP IP address of the DVR you my input them directly into Internet Explorer or you may
use the DDNS IP as indicated below.
Please check the network and port forwarding setup before starting the connection.
[1] Visit http://www.ddnsip.net
① Enter the DVR's web code.
You can find the web code as below.
Call the Menu → System → Information → Web code
② You can enter any name you want for your domain name.
③ Click "Register".
Also you can delete your registered DVR after entering the web code and domain name.
☞ Note
It takes around 10 to 15 minutes to get the service after the registration. So, please try the connection 10 to
15 minutes later.
[2] How to connect
Run the web browser on PC screen and enter
to register your DVR.
http://soon.ddnsip.net to connect.