1. Manuals
  2. Brands
  3. Clover Manuals
  4. DVR
  5. LCD2084
  6. Instruction manual

Clover LCD2084 Instruction Manual

20.1” wide lcd screen all in one system built-in 8ch dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
20.1" Wide LCD Screen
All in One System Built-in 8Ch DVR
MODEL: LCD2084, LCD2088
Ver. 051309, 061009, 102609
Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
1

Advertisement

Table of Contents
loading

Related Manuals for Clover LCD2084

Summary of Contents for Clover LCD2084

  • Page 1 INSTRUCTION MANUAL 20.1” Wide LCD Screen All in One System Built-in 8Ch DVR MODEL: LCD2084, LCD2088 Ver. 051309, 061009, 102609 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.

  • Page 3: Table Of Contents

    Contents CONTENTS ABOUT THIS MANUAL........................9 1. UNPACKING..........................11 1-1. 20.1” W LCD P .......... 12 ANEL UILT IGITAL IDEO ECORDER 2. FEATURES ............................ 13 3. WHAT TO DO AT THE TIME OF INSTALLATION................ 15 4. SPECIFICATIONS.......................... 17 5. INSTALLATION ..........................19 5-1.
  • Page 4 Instruction Manual Stand-alone DVR 6-6.1. FULL SCREEN..........................37 6-6.2. SPLIT SCREENS...........................38 6-7. LIVE ..........................39 6-7.1. FULL SCREEN..........................39 6-7.2. SPLIT SCREEN ..........................39 6-7.3. SEQUENCING SCREENS ......................40 6-7.4. LIVE AUDIO ...........................41 6-7.4.1. COMMUNICATION BETWEEN MONITOR AND CLIENT COMPUTER VIA INTERNET ..42 6-7.4.2. COMMUNICATION BETWEEN MONITOR AND CAMERAS ..........42 6-7.5.
  • Page 5 Contents 6-11. COPY ..........................68 6-11.1. Copying devices ...........................68 6-11.2. Set the Copy Start Time (Copying extent) ...................69 6-11.3. Set the Copy End Time (Copying extent) ..................71 6-11.4. Copying the recorded data during replaying................72 6-11.5. PLAYER / AVI File Format......................74 7.
  • Page 6 Instruction Manual Stand-alone DVR 7-6. RECORD......................... 101 7-6.1. Record ICON Display........................101 7-6.2. All Manual / Timer recording button .....................102 7-6.3. All Motion ON / OFF, Sensitivity Setting ..................103 7-6.4. All Sensors ON / OFF ........................104 7-6.5. Size (Recording Resolution) ......................104 7-6.6.
  • Page 7 Contents 8-4.2. Connection ...........................142 8-4.3. Capture............................143 8-4.4. Status ............................144 8-4.5. Replay ............................145 8-4.6. COPY ............................147 8-4.7. Switch the Normal Screen to Full Screen..................149 8-4.8. Speaker / Microphone ........................150 8-4.9. Connection mode .........................151 8-4.9.1. Terminal mode........................151 8-4.9.2. Multi mode..........................152 8-4.10. Copy in the Terminal mode (not available on this version)............153 8-4.11.
  • Page 8 Instruction Manual Stand-alone DVR...

  • Page 9: About This Manual

    About this manual This is the Instruction Manual for 20.1” Wide TFT-LCD monitor built-in 8Ch DVR system, Model LCD2084 and LCD2088. The last digit of the model numbers (e.g.: 4 and 8) represent the number of cameras included in the system.
  • Page 10 Instruction Manual Stand-alone DVR...

  • Page 11: Unpacking

    1. Unpacking Care should be taken when unpacking to avoid damaging the system. Please check that the following items are included: USB Mouse 20.1” LCD Monitor built-in 8 Ch DVR Instruction Manual 2-Indoor camera with C-mount lens Host Program (DvrMaster) on CD 2-Outdoor camera with mounting bracket RJ-45 Cable 2-Mounting bracket for indoor cameras...

  • Page 12: Wide Lcd Panel Built-In 8 Ch Digital Video Recorder

    Under emergency situation, the remote operator can control, turn on and turn off the field installed alarms, such as a siren or light. It is a very user- friendly DVR system. User can control the LCD2084 by Mouse or Buttons on the top panel or Remote controller.

  • Page 13: Features

    2. Features ▶ 20.1” Wide Screen - High resolution TFT-LCD 1,680(H) x 1,050(V), Contrast ratio 1,000:1, Response 3.9msec ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), Timer, and Motion Detection Recording. ▶ User friendly GUI - A few simple buttons for Easy control. ▶...
  • Page 14 Instruction Manual Stand-alone DVR...

  • Page 15: What To Do At The Time Of Installation

    3. What to do at the time of Installation The system should be installed in the following order; 1. Make sure all the required hardware is available. - 20.1” wide TFT-LCD monitor built-in 8 Ch DVR - Up to 8 cameras capacity (Refer to the retail box for the number of camera included in the system).
  • Page 16 Instruction Manual Stand-alone DVR...

  • Page 17: Specifications

    4. Specifications ITEM DESCRIPTIONS Television System NTSC Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs 8- 6pin Din Cameras and 8- BNC Cameras VIDEO SIGNAL Video Input Signal Composite 1.0 Vp-p 75 Ohms Video Output 1- Composite output Video Output Signal Composite 1.0 Vp-p 75 Ohms...
  • Page 18 Instruction Manual Stand-alone DVR Display 20.1” TFT LCD active matrix Pixel Pitch 0.258 mm x 0.258mm Active Display Area 433.44(H) x 270.90(V) mm Display Colors 16.7M (Hi-FRC) Display Mode Normally White Pixel Arrangement RGB vertical stripe Luminance of White 300 cd/㎡ Contrast Ratio 1,000 : 1 Viewing Angle L/R/U/D...

  • Page 19: Installation

    5. Installation CONTENTS 5-1. CONTROLS AND CONNECTORS................20 5-2. NOTE FOR INSTALLATION ..................23 5-3. SYSTEM CONNECTION ..................24 5-4. INSTALLATION......................25 5-4.1. C ..................25 AMERA ONNECTION 5-4.2. I ................25 NSTALLATION OF THE ONITOR 5-4.2.1. C ............26 ONNECTION OF OMPOSITE ONITOR 5-4.3. S RELAY IN &OUT ............26 ENSOR ONNECTION AND 5-4.4.

  • Page 20: Controls And Connectors

    Instruction Manual Stand-alone DVR 5-1. Controls and Connectors Front POWER S/W & LED REMOTE CONTROL SIGNAL RECEIVER [Fig. 5-1 Front/Top View]...
  • Page 21 5. Installation 1. REC Key - Press this key to start recording. - In order to stop recording, press this key again or click the REC button on the MENU window and then the following message will be appeared. Click the OK button or press the ENTER key.
  • Page 22 Instruction Manual Stand-alone DVR Rear POWER INPUT POWER S/W ALARM INPUT ALARM OUT, CAMERA IN (mini DIN/BNC) RS485 ETHERNET USB CONNECTOR ETHERNET RS485 ALARM ALARM IN AUDIO VIDEO CAMERA IN AC INPUT USB 2 USB 1 COMPOSITE - VIDEO OUT - AUDIO OUT [Fig.

  • Page 23: Note For Installation

    5. Installation 5-2. Note for Installation Install the system according to the instructions described in this manual. The 20.1” LCD monitor built-in 8Ch DVR and Indoor Cameras are designed for indoor use and should not be used outdoors. Avoid any area with high humidity or dust which can shorten lifetime of the system. Choose a well ventilated area and keep minimum of 10”...

  • Page 24: System Connection

    Instruction Manual Stand-alone DVR 5-3. System Connection [Fig. 5-3 System Connection]...

  • Page 25: Installation

    5. Installation 5-4. Installation 5-4.1. Camera Connection ▫ Connection of 6pin MINI DIN Cameras Connect the supplied cameras to the Camera Input (6pin mini DIN jack) on the left side of the system as shown in [Fig. 5-2 Rear & Side View]. Connect the BNC cameras (not included) to the Camera Input (BNC connector) on the left side of the system as shown in [Fig.

  • Page 26: 5-4.2.1. Connection Of Composite Monitor

    Instruction Manual Stand-alone DVR Note: - Pay attention to not make scratches or dents on the surface of panel (screen) during installation of the system. - In case of this, the warranty will be voided. 5-4.2.1. Connection of Composite Monitor If necessary, connect the composite Video Output (yellow RCA) and Audio Output (white RCA) to Video IN and Audio IN on a composite monitor or TV (RCA cable: not included).

  • Page 27: 5-4.4. Rs485 Connection

    5. Installation 5-4.4. RS485 Connection ▫ Connect the cable to the “RS485 PORT” on the terminal block of the system. RS485 ALARM ALARM IN [Fig. 5-8 RS485 Connection] 5-4.5. Connection to an Ethernet Network (Optional) ▫ Connecting the cable to Ethernet. Our Ethernet connector is a RJ45 type.

  • Page 28: 5-4.6. Power Cable Connection

    Instruction Manual Stand-alone DVR 5-4.6. POWER CABLE CONNECTION Connect the provided AC power cable to the monitor and an AC outlet. AC input voltage is AC 110V to 220V 50/60Hz. It should not be shared with other electrical equipment on the same line. Frequent power cuts can cause crucial failures, so if you have an unstable power source we recommend the use of an Uninterrupted Power Supply or other backup power source.

  • Page 29: How To Operate

    6. How to operate CONTENTS 6-1. GENERAL INFORMATION ..................31 6-2. OPERATING INTERFACE ..................32 6-3. IR REMOTE CONTROLLER ..................33 6-4. POWER ON/OFF....................... 34 6-4.1. POWER ON ....................... 34 6-4.2. STAND-BY POWER MODE BUTTON ..............34 6-4.3. POWER OFF ..................... 34 6-5.
  • Page 30 Instruction Manual Stand-alone DVR CONTENTS 6-7.4. LIVE AUDIO ..........................41 6-7.4.1. COMMUNICATION BETWEEN MONITOR AND CLIENT COMPUTER VIA INTERNET ..42 6-7.4.2. COMMUNICATION BETWEEN MONITOR AND CAMERAS ..........42 6-7.5. ZOOM............................43 6-7.6. OSD ON / OFF..........................44 6-7.7. PAN / TILT..........................45 6-7.8. SYSTEM STATUS ........................48 6-7.9.

  • Page 31: General Information

    6. How to Operate 6-1. General Information ▫ You can operate all functions of the system by use of the buttons located on the top panel, remote controller and a mouse. Additionally, you can remotely control this unit via RS485 or the Ethernet port located on the side of the unit.

  • Page 32: Operating Interface

    Instruction Manual Stand-alone DVR 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the top panel or buttons on the remote controller and clicking the mouse. A lot of users mostly prefer to use a mouse on these kinds of products such as DVRs, computers and computer-aided devices.

  • Page 33: Ir Remote Controller

    6. How to Operate 6-3. IR Remote Controller 1. POWER / STANDBY 2. REC 2, 3, 4, 5 3. STATUS 4. ZOOM 5. FREEZE 6. No.1~8 Channel (Full Screen) or IR ID Number 7. Display format (Split) 8. IR ID Set 9.

  • Page 34: Power On/Off

    Instruction Manual Stand-alone DVR 6-4. Power On/Off 6-4.1. POWER ON On the rear panel: Turn on the POWER switch on the rear panel (See ). The LED on the front panel is lit Fig.5-2 when the POWER switch is ON. By Stand-by Power Mode Button Press this button on the front panel (See ) to turn ON the system when the POWER...
  • Page 35 6. How to Operate ↵) ▫ Press the ENTER ( button to turn the power OFF. By clicking the mouse: ▫ Right-click on the screen in the live mode to display the MENU window. ▫ Click the POWER OFF button on the MENU window (See [Fig. 6-3]) and then the message (See [Fig.

  • Page 36: Menu Window

    Instruction Manual Stand-alone DVR 6-5. Menu Window Right-click on the screen in the LIVE or the RECORD mode and then the MENU window will be appeared as shown in [Fig. 6-4]. Click the (EXIT) button to return to the LIVE Mode. CLICK CLICK [Fig.

  • Page 37: Display Screen

    6. How to Operate 6-6. Display Screen 6-6.1. FULL SCREEN SEQUENCE ICON CAMERA TITLE RECORD ICON COPY ICON AUDIO ICON LIVE AUDIO CURRENT TIME [Fig. 6-5 FULL screen]...

  • Page 38: 6-6.2. Split Screens

    Instruction Manual Stand-alone DVR 6-6.2. SPLIT SCREENS FULL SCREEN SEQUENCING SCREEN 4page SEQUENCING SCREEN QUAD SCREEN...

  • Page 39: Live

    6. How to Operate 6-7. LIVE 6-7.1. FULL SCREEN ▫ A Full SCREEN is available in the LIVE mode or the RECORD mode. ▫ Click on a certain camera’s screen in the LIVE mode or in the RECORD mode, then a FULL SCREEN will be displayed.

  • Page 40: 6-7.3. Sequencing Screens

    Instruction Manual Stand-alone DVR 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mode. Each of the channels will be displayed in sequence and the dwell time can be adjusted in the camera set up menu (Refer to 7-4.7). ▫...

  • Page 41: 6-7.4. Live Audio

    6. How to Operate 6-7.4. LIVE AUDIO ▫ Setup LIVE AUDIO when the system is not connected through the DvrMaster or Internet Explorer and the OSD is turned ON. ▫ If cameras (up to 8cameras) have audio function, it will sound in the live mode. ▫...

  • Page 42: 6-7.4.1. Communication Between Monitor And Client Computer Via Internet

    Instruction Manual Stand-alone DVR 6-7.4.1. COMMUNICATION BETWEEN MONITOR AND CLIENT COMPUTER VIA INTERNET ▫ This system is normally in listening mode between the LCD monitor and your computer through the Internet (DvrMaster or Internet Explorer). In order to communicate between the system and your computer, connect a head phone or a microphone and a speaker to the computer.

  • Page 43: 6-7.5. Zoom

    6. How to Operate 6-7.5. ZOOM The image on the screen will be zoomed up to 2 times when the ZOOM button is clicked in the LIVE mode (This function is available on the full screen mode only). ▫ Right-click on the screen in the LIVE or the RECORD mode and the MENU window will be appeared as shown in [Fig.

  • Page 44: 6-7.6. Osd On / Off

    Instruction Manual Stand-alone DVR 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU window to turn the OSD (On Screen Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared. CAM 01 CAM 02 CAM 03...

  • Page 45: 6-7.7. Pan / Tilt

    6. How to Operate 6-7.7. PAN / TILT ▫ Click the PAN/TILT button on the MENU window in the LIVE mode to access the PAN/TILT cameras. ▫ Click the (EXIT) button to return to the MENU window. [Fig. 6-14 PAN/TILT button] [Fig.
  • Page 46 Instruction Manual Stand-alone DVR PAN / TILT PRESET EXIT ZOOM / FOCUS / IRIS CHANNEL LEFT RIGHT [Fig. 6-16 PAN/TILT CONTROL] ▫ Channel Selection and Screen Conversion To change a channel, press the CHANNEL button on the remote controller or click [Fig.
  • Page 47 6. How to Operate ▫ PRESET [Fig. 6-17 Preset Menu] It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Preset Setup - Select a position of camera you wish to preset and click the SET button in [Fig. 6-17]. - Click the number(s) for the current position of camera.

  • Page 48: 6-7.8. System Status

    Instruction Manual Stand-alone DVR 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATUS button on the MENU window to see the system status as shown below ([Fig. 6-18]). ▫ Click the (EXIT) button to return to the MENU window. [Fig. 6-18 SYSTEM STATUS button] [Fig.

  • Page 49: 6-7.9. Power Loss Lists

    6. How to Operate 6-7.9. POWER LOSS LISTS The list indicates the time/date when the system power was turned OFF. ▫ Click the POWER LOSS LISTS button on the SYSTEM STATUS window to view the POWER LOSS LISTS. ▫ Each of the pages contains 10 lists. You can search the pages by clicking the UP/DOWN button.
  • Page 50 Instruction Manual Stand-alone DVR ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POWER LOSS LISTS will be deleted. To cancel, click the CANCEL button [Fig.

  • Page 51: 6-7.10. Video Loss List

    6. How to Operate 6-7.10. VIDEO LOSS LIST The list indicates the video loss channel and the time/date when the video signal was disconnected. ▫ Click the VIDEO LOSS LISTS button on the SYSTEM STATUS window to view the VIDEO LOSS LISTS.
  • Page 52 Instruction Manual Stand-alone DVR ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the VIDEO LOSS LISTS will be deleted. To cancel, click the CANCEL button [Fig.

  • Page 53: Video Enhance

    6. How to Operate 6-8. VIDEO ENHANCE ▫ Click the DISPLAY button in the MENU window to enhance the picture quality on each of channels (Contrast and Brightness) and VGA output (Contrast, Brightness and Saturation). The VIDEO ENHANCE menu will show up (See [Fig. 6-26]). ▫...

  • Page 54: 6-8.1. Camera Input Config (Contrast / Brightness)

    Instruction Manual Stand-alone DVR 6-8.1. CAMERA INPUT CONFIG (CONTRAST / BRIGHTNESS) ▫ Click a CAMERA INPUT button in the VIDEO ENHANCE menu. ▫ The CONTRAST and BRIGHTNESS sliders will be displayed along with camera picture as shown in [Fig. 6-27]. ▫...

  • Page 55: 6-8.2. Vga Output Config (Scale / Contrast / Brightness / Saturation)

    6. How to Operate 6-8.2. VGA OUTPUT CONFIG (SCALE / CONTRAST / BRIGHTNESS / SATURATION) ▫ To Setup the SCALE / CONTRAST / BRIGHTNESS / SATURATION of VGA Output, click the VGA OUTPUT in the VIDEO ENHANCE menu and then the VGA ENHANCE menu will display as shown in [Fig.

  • Page 56: Record

    Instruction Manual Stand-alone DVR 6-9. Record This system provides Watchdog function. When power goes off during recording and the power turns on, the system will automatically start recording. 6-9.1. Manual (Continuous) recording ▫ Click the SETUP icon on the MENU window in the LIVE mode. ▫...

  • Page 57: 6-9.3. Timer Recording

    6. How to Operate The MOTION ( ) or SENSOR ( ) as shown in [Fig. 6-30] should be turned ON in this recording mode. ▫ Press the RECORD button on the side panel or click the RECORD icon on the MENU window.

  • Page 58: 6-9.4. Timer Event Recording

    Instruction Manual Stand-alone DVR 6-9.4. Timer Event Recording ▫ Click the SETUP icon on the MENU window in the LIVE mode. ▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING (...

  • Page 59: 6-9.5. Audio Recording

    6. How to Operate [Fig. 6-34 Hour/Minute Selection Table] 6-9.5. Audio Recording ▫ Click the Audio Recording button, in the RECORD menu as shown in Fig.6- 35. If the “O” is selected, the corresponding channel’s audio will record along with video signals.

  • Page 60: 6-9.7. Recording Icons

    Instruction Manual Stand-alone DVR 6-9.7. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Recording Icon OFF, click the DISPLAY ON in the RECORD menu and then it will be turned OFF.

  • Page 61: Replay

    6. How to Operate 6-10. REPLAY 6-10.1. QUICK REPLAY It is available only by pressing the QICK SEARCH button on the remote controller. ▫ Press the PLAY button, then the recent recorded list will be played. 6-10.2. REPLAY ▫ Click the REPLAY icon on the MENU window, then the REPLAY window as shown in [Fig. 6-38] will be displayed.

  • Page 62: 6-10.2.1. Playback Devices

    Instruction Manual Stand-alone DVR 6-10.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices will be displayed as shown in [Fig.
  • Page 63 6. How to Operate ▫ Select the hour on the Start Time Select Window (See [Fig. 6-41]) by clicking the mouse on the Hour (0 – 23 hour) you wish to start to play. The green active buttons indicate the HOUR that contains recorded data, and the red active buttons indicate the selected Start HOUR.

  • Page 64: 6-10.2.3. Replaying

    Instruction Manual Stand-alone DVR 6-10.2.3. Replaying Replaying start time set-up can be possible within a recording time extent. ▫ Replay buttons (NORMAL / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the recorded data by MOTION only. SENSOR PLAY: Click the button to play the recorded data by SENSOR only.
  • Page 65 6. How to Operate ▫ How to control the buttons while replaying ③ ④ ② ④ ③ ⑤ ① [Fig. 6-44 Replay screen] ① Search Slider It is possible to playback by clicking the slider on the bar and dragging it. ②...

  • Page 66: 6-10.2.4. Disappearance Of Replay Control Buttons

    Instruction Manual Stand-alone DVR ⑤ Speaker ON / OFF Turn speaker ON or OFF ⑥ Speaker Volume Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO is turned 6-10.2.4. Disappearance of Replay control buttons During replaying, the replay control buttons appear on the bottom of the screen.
  • Page 67 6. How to Operate - Click the mouse on one out of channels during replaying to view a full screen. Click the mouse on the full screen during replaying to return to the split screen. [Fig. 6-45 SPLIT screen during replaying] [Fig.

  • Page 68: Copy

    Instruction Manual Stand-alone DVR 6-11. COPY ▫ Click the COPY icon on the MENU window, and then the COPY window as shown in [Fig. 6-47] will be displayed. ▫ Click the (EXIT) button to return to the previous mode. [Fig. 6-47 COPY window] 6-11.1.

  • Page 69: 6-11.2. Set The Copy Start Time (Copying Extent)

    6. How to Operate ▫ Connect the USB devices to the DVR ▫ Click the SETUP icon on the MENU window, and the SETUP menu will be displayed. ▫ Click the DISK MANAGER in the SETUP menu, and the DISK MENAGER will be displayed. ▫...
  • Page 70 Instruction Manual Stand-alone DVR ① All channels, HOUR selection ② HOUR selection button ③ channel selection [Fig. 6-49 Copy Start time and Channel Selection window] ① All channels, HOUR selection button. Click the arrow button in the upper left corner as shown in [Fig. 6-49] to set the full extent of the recording and all the channels simultaneously.

  • Page 71: 6-11.3. Set The Copy End Time (Copying Extent)

    6. How to Operate [Fig. 6-50 Copy Start/End setup buttons] By using the Start/End set-up bar: The starting time to copy can also be set by clicking the slider on the bar and dragging it or just click the bar. [Fig.

  • Page 72: 6-11.4. Copying The Recorded Data During Replaying

    Stand-alone DVR 6-11.4. Copying the recorded data during replaying The system, LCD2084 allows users to copy the recorded data during replaying. ▫ Start replaying (See section 6-10). ▫ Right-click on the replaying screen, then the COPY DATA screen will be displayed (See [Fig.
  • Page 73 6. How to Operate [Fig. 6-53 End Copy Time Setup window] ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section 6-11.1). Select COPY Mode Only when the device and media are ready to copy, the Ready on the corresponding device and media will be displayed.

  • Page 74: 6-11.5. Player / Avi File Format

    Instruction Manual Stand-alone DVR ▫ As soon as one of the above buttons is clicked, copying will start along with displaying the icon shown in [Fig. 6-54]. The following icon indicates that copying is in process. [Fig. 6-54 Copying Icon] 6-11.5.

  • Page 75: Setup

    7. SETUP CONTENTS 7-1. SETUP ......................... 78 7-2. SYSTEM........................79 7-2.1. SYSTEM NAME....................80 7-2.2. LANGUAGE......................81 7-2.3. TIME / DATE ......................81 7-2.4. SYSTEM CONFIG ....................83 7-2.4.1. FACTORY DEFAULT ..................84 7-2.4.2. LOAD CONFIG / BACKUP CONFIG ............. 85 7-2.5.
  • Page 76 Instruction Manual Stand-alone DVR CONTENTS 7-4. CAMERA ........................92 7-4.1. C ON/OFF ....................93 AMERA 7-4.2. C ) ................93 AMERA AMERA ITLE 7-4.3. B ........................94 UZZER 7-4.4. R ........................94 ELAY 7-4.5. P ....................95 ETTINGS 7-4.6. D .........................99 ISPLAY 7-4.7. S ..................99 EQUENCING DWELL TIME 7-5.
  • Page 77 7. Setup CONTENTS 7-7. NETWORK ......................119 7-7.1. IP M ......................119 7-7.2. GATEWAY, SUBNET, IP ADDRESS ...............120 7-7.3. P ......................121 7-7.3.1. P ..................121 ORWARDING 7-7.4. MAC ID ......................121 7-7.5. MNS (MAC NAME SERVER) .................122 7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM)..........123 7-7.7.

  • Page 78: Setup

    Instruction Manual Stand-alone DVR 7-1. SETUP [Fig. 7-1 Setup Icon on MENU window] It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETUP” button on the MENU window, then the SETUP menu will be displayed. ▫...

  • Page 79: System

    7. Setup 7-2. SYSTEM ▫ Click the “SYSTEM” button in the SETUP menu, and then the SYSTEM menu shown in Fig.7-3 will be displayed. ▫ Click the “EXIT” button to return to the SETUP menu. [Fig. 7-3 SYSTEM menu]...

  • Page 80: 7-2.1. System Name

    Instruction Manual Stand-alone DVR 7-2.1. SYSTEM NAME The SYSTEM NAME is one of the important factors to access the DVR through MNS (MAC NAME SERVER) with the DvrMaster (GUI). You can’t access the DVR system if the SYSTEM NAME you entered already exists on the network.

  • Page 81: 7-2.2. Language

    7. Setup 7-2.2. LANGUAGE ▫ Click the “LANGUAGE” button in the SYSTEM menu, then the LANGUAGE submenu will display. ▫ Select English or Spanish by clicking the mouse. ▫ Click the “EXIT” button to return to the SYSTEM menu. [Fig. 7-6 LANGUAGE button] 7-2.3.
  • Page 82 Instruction Manual Stand-alone DVR [Fig. 7-9 Time Setting] ▫ DATE FORMAT There are three formats to display the time and date as follows. • MM / DD / YYYY: For U.S.A. • YYYY / MM / DD: For Asian countries. •...

  • Page 83: 7-2.4. System Config

    7. Setup 7-2.4. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYSTEM menu, and then the SYSTEM CONFIG menu will be displayed (See [Fig. 7-13]). ▫ Click the “EXIT” button to return to the SYSTEM menu. [Fig. 7-13 SYSTEM CONFIG]...

  • Page 84: 7-2.4.1. Factory Default

    Instruction Manual Stand-alone DVR 7-2.4.1. FACTORY DEFAULT ▫ Click the “FACTORY DEFAULT” button in the SYSTEM CONFIG menu, and you will be asked as shown in [Fig. 7-15]. [Fig. 7-14 Factory Default button] ▫ Click the “OK” button in [Fig. 7-15] to reset to the Factory Default Values, and then the system will save the factory default values (settings).

  • Page 85: 7-2.4.2. Load Config / Backup Config

    7. Setup 7-2.4.2. LOAD CONFIG / BACKUP CONFIG You can save up to four different settings in the BACKUP CONFIG and load the files in the LOAD CONFIG to change the settings to the system. ▫ LOAD CONFIG This function is to load the changed settings to the system. - Click the LOAD CONFIG button and then the LOAD CONFIG window will be displayed (See [Fig.
  • Page 86 Instruction Manual Stand-alone DVR ▫ BACKUP CONFIG This function is to save the current settings to load the settings to the system. Save the current settings in the BACKUP CONFIG in order to load it to the system in the near future whenever you change the settings.

  • Page 87: 7-2.5. Password

    7. Setup 7-2.5. PASSWORD ▫ ON/OFF Select ON or OFF by clicking the mouse. If the ON is selected, the password has to be entered to get into the SETUP mode, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Master.

  • Page 88: 7-2.6. Ir Remote Id

    Instruction Manual Stand-alone DVR 7-2.6. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the systems. You don’t have to assign any ID on the single unit and you can control the system with the provided remote controller without IR REMOTE ID, which is in the OFF mode (Skip this section).

  • Page 89: 7-2.7. Firmware Update

    7. Setup 7-2.7. FIRMWARE UPDATE There are two ways to update the firmware through USB memory and the DvrMaster (GUI). We recommend users to update the firmware only in the LIVE mode. ▫ By USB memory - Format the USB with your computer and save the firmware file on it (not including folder).

  • Page 90: Disk Manager

    Instruction Manual Stand-alone DVR 7-3. DISK MANAGER ▫ Click the “ ” button in the SETUP menu and then the DISK MANAGER window will be displayed (See [Fig. 7-25]). ▫ Click the (EXIT) button to return to the SETUP menu. ▫...

  • Page 91: 7-3.1. Hdd Write Fail

    7. Setup 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the recording mode, the system will activate the relay output (See section 5-4.3) for a siren or other device. ▫...

  • Page 92: Camera

    Instruction Manual Stand-alone DVR 7-4. CAMERA ▫ Click the “CAMERA” button in the SETUP menu and then the CAMERA menu will be displayed (See [Fig. 7-29]). To change the settings in the CAMERA menu, stop recording by clicking the RECORD icon on the MENU window. It is possible only in the LIVE mode. ▫...

  • Page 93: 7-4.1. Camera On/Off

    7. Setup 7-4.1. Camera ON/OFF ▫ Click on each of the channels to select the “ or “ in the CAMERA menu. If the “ O” X” O” selected, the corresponding video channels (CAM 01 through CAM 08) will be displayed on the screen.

  • Page 94: 7-4.3. Buzzer

    Instruction Manual Stand-alone DVR 7-4.3. Buzzer In order to alert users, the Buzzer will sound at that time video signal lost. ▫ Click on each of the channels you wish to turn the buzzer “ON” or “OFF”. If the “O” is selected, the buzzer will sound when video signal lost and if the “X”...

  • Page 95: 7-4.5. Pan/Tilt Settings

    7. Setup 7-4.5. Pan/Tilt Settings Click the PAN/TILT button on the corresponding channels in the CAMERA menu, then the ▫ PAN/TILT window will be displayed as shown in [Fig. 7-36]. Click the (EXIT) button to return to the CAMERA menu. ▫...
  • Page 96 Instruction Manual Stand-alone DVR ▫ Pan/Tilt Vendor select Click the “PAN/TILT” button in the PAN/TILT window, then the vendor lists will show up. Select a vendor on the vendor lists by clicking the mouse. [Fig. 7-37 PAN/TILT] [Fig. 7-38 PAN/TILT Vendor lists] ▫...
  • Page 97 7. Setup ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT window and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse. [Fig. 7-41 BAUDRATE button] [Fig.
  • Page 98 Instruction Manual Stand-alone DVR ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window by clicking the mouse. [Fig. 7-45 STOP BITS button] [Fig. 7-46 Stop Bits pop-up window] ▫...

  • Page 99: 7-4.6. Display

    7. Setup 7-4.6. Display ▫ Click the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera name (camera title) in the LIVE mode will be displayed on the screen. If the “OFF” is selected, the camera name (camera title) in the LIVE mode won’t be displayed.

  • Page 100: Audio

    Instruction Manual Stand-alone DVR 7-5. AUDIO ▫ Click on the AUDIO button in the SETUP menu and then the AUDIO menu will be displayed on the screen. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig. 7-52 AUDIO menu] 7-5.1.

  • Page 101: Record

    7. Setup 7-6. RECORD ▫ Click the “RECORD” button in the SETUP menu and then the RECORD menu will be displayed as shown in [Fig. 7-54]. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig. 7-54 RECORD menu] 7-6.1.

  • Page 102: 7-6.2. All Manual / Timer Recording Button

    Instruction Manual Stand-alone DVR 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer recording button in the RECORD menu, then the All Manual / Timer recording button will be displayed as shown in [Fig. 7-57]. ▫...

  • Page 103: 7-6.3. All Motion On / Off, Sensitivity Setting

    7. Setup 7-6.3. All Motion ON / OFF, Sensitivity Setting ▫ Click the button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as shown in [Fig. 7-59]. ▫ By clicking the mouse, select the on the pop-up window (See [Fig.

  • Page 104: 7-6.4. All Sensors On / Off

    Instruction Manual Stand-alone DVR 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu, then the ALL SENSOR setup pop-up window will be displayed as shown in [Fig. 7-62]. ▫ By clicking the mouse, select the on the pop-up window (See [Fig.

  • Page 105: 7-6.6. Recording Speed

    7. Setup [Fig. 7-64 Record Size pop-up window] 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Seconds: Recording Speed) button on each of the channels in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in [Fig.

  • Page 106: 7-6.7. Recording Quality

    Instruction Manual Stand-alone DVR NTSC [Fig. 7-67 Recording Speed for each channel] 7-6.7. Recording Quality ▫ Click the QUALITY button on each of the channels in the RECORD menu, then the QUALITY pop-up window will be displayed as shown in [Fig. 7-69]. ▫...

  • Page 107: 7-6.8. Recording Mode

    7. Setup 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording), which keeps recording continuously if the OVERWRITE is set ON in the DISK MANAGE menu. This Manual Recording mode is not only one of the most popular Recording modes for users, but also one of the most convenient Recording modes to use.

  • Page 108: 7-6.9. Recording By Motion Detection

    Instruction Manual Stand-alone DVR 7-6.9. Recording by Motion Detection When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for each of the channels) and detected motion of objects, the system begins recording automatically.
  • Page 109 7. Setup ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Motion or Sensor activation. Click the mouse on the PRE in the MOTION menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.
  • Page 110 Instruction Manual Stand-alone DVR ▫ Region The Motion Detection Area displays in blue on the screen, and it turns to doubly-boxes when the motion is detected. The white color on the screen represents none of detection area. There are three kinds of REGION settings as below. Click the button in the MOTION menu, and then the setting window for Motion Detection Area will be displayed in blue as shown in [Fig.
  • Page 111 7. Setup By All Set Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop- up setting window for Motion Detection Area will be displayed ([Fig. 7-76]). By clicking the mouse, select the button on the pop-up setting window.
  • Page 112 Instruction Manual Stand-alone DVR - All Clear Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop-up setting window for Motion Detection Area will be displayed ([Fig. 7-76]). By clicking the mouse, select the button on the pop-up setting window in order to clear the Motion Detect Area.
  • Page 113 7. Setup By Window Set Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop- up setting window for Motion Detection Area will be displayed ([Fig. 7-76]). By clicking the mouse, select the button on the pop-up setting window. Click one of cells for the starting point of the area which you would like to designate, and then click the other one of cells for the ending point of area until the motion detection area is the size you want it to be.
  • Page 114 Instruction Manual Stand-alone DVR - Window Clear Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop-up setting window for Motion Detection Area will be displayed ([Fig. 7-76]). By clicking the mouse, select the button on the pop-up setting window in order to clear the Motion Detection Area, and then the motion detection area you have created will be displayed.
  • Page 115 7. Setup By Each Cell Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the pop- up setting window for Motion Detection Area will be displayed ([Fig. 7-76]). By clicking the mouse, select the button on the pop-up setting window.
  • Page 116 Instruction Manual Stand-alone DVR Please pay attention to the following directions in order to use the Motion Note : Detection function properly: • Adjust the sensitivity level and motion area to fit your requirements. • Do not use this function in an area where many objects are continuously moving. In case of this, change the recording mode to the Continuous (Manual) Recording mode.

  • Page 117: 7-6.10. Recording By Sensor (Pir Sensor)

    7. Setup 7-6.10. Recording by Sensor (PIR Sensor) ▫ Click the mouse on the button for each of the channels in the RECORD menu, and then the SENSOR menu will be displayed on the screen as shown in [Fig. 7-84]. ▫...
  • Page 118 Instruction Manual Stand-alone DVR ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.

  • Page 119: Network

    7. Setup 7-7. NETWORK ▫ Click the “NETWORK” button in the SETUP menu, and then the NETWORK menu will be displayed on the screen as shown in [Fig. 7-90]. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig.

  • Page 120: 7-7.2. Gateway, Subnet, Ip Address

    Instruction Manual Stand-alone DVR [Fig. 7-91 IP Mode button] [Fig. 7-92 IP Mode pop-up window] 7-7.2. GATEWAY, SUBNET, IP ADDRESS ▫ Click the GATEWAY / SUBNET / IP ADDRESS button in the STATIC IP MODE, then the On Screen Keyboard will appear. ▫...

  • Page 121: 7-7.3. Port

    7. Setup 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the network viewer. It can be set from 1 to 65535 values. ▫ Click the PORT button in the Network menu, then the On Screen Keyboard will show up. ▫...

  • Page 122: 7-7.5. Mns (Mac Name Server)

    Instruction Manual Stand-alone DVR 7-7.5. MNS (MAC NAME SERVER) As a sort of DDNS, two servers in our company are being operated so that our client can access DVR with a Dynamic IP address. If one of servers stops operating, the other one will automatically start working.

  • Page 123: 7-7.6. Ddns (Dynamic Domain Name System)

    7. Setup ▫ IP ADDRESS / PORT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF YOU CHANGE THEM, YOU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR NETWORKING WILL BE DISCONNECTED.
  • Page 124 Instruction Manual Stand-alone DVR ▫ SERVER Choose the SERVER button in the DDNS menu by clicking the mouse or pressing the buttons on the remote controller and select the DYNDNS.ORG (or NO-IP.ORG) provided www.dyndns.org (or www.no-ip.org) at no cost. [Fig. 7-100 SERVER button] ▫...

  • Page 125: 7-7.7. How To Setup And Use The Ddns

    7. Setup 7-7.7. HOW TO SETUP AND USE THE DDNS 7-7.7.1. Router. It has to be set as a virtual server (or port forwarding) in order to utilize the DDNS. There are a lot of manufacturers on the market. Please read the provided manual thoroughly before setting or visit our website at www.cloverusa.co.kr in regards to do it.

  • Page 126: 7-7.8. Email Notification

    Instruction Manual Stand-alone DVR 7-7.8. EMAIL NOTIFICATION ▫ Email notification enables to notify events (sensor, motion, video loss, power on/off, power loss, record on/off, record fail, replay or copy start/stop) by sending emails to one or two email accounts. [Fig. 7-104 Email Notification window]...
  • Page 127 7. Setup ▫ EMAIL ADDRESS SETUP [Fig. 7-105 Keyboard window] - Click one of email address boxes and then the On Screen Keyboard will show up as shown [Fig. 7-105]. - Delete the current email address with the button and enter an email address by using the On Screen Keyboard.
  • Page 128 Instruction Manual Stand-alone DVR ▫ EVENT Setup - Click the check boxes below to choose the events you need. - To delete, click the check box again. [Fig. 7-107 Event setup] ▫ INTERVAL TIME Setup - Click the INTERVAL TIME (see [Fig. 7-108]) to set the interval time of sending emails and then choose the time (in minutes) on the pop-up window by clicking the mouse.
  • Page 129 7. Setup If the motion is selected in [Fig. 7-108], you may receive numerous emails from Note : the DVR systems due to a couple of factors such as continuous moving objects, a strong and changing lighting source, low resolution and noises of cameras. In case of this, select a longer INTERVAL TIME and refer to “Note for Motion Detection Function”...
  • Page 130 Instruction Manual Stand-alone DVR...

  • Page 131: Remote Host Program

    8. Remote Host Program...
  • Page 132 Instruction Manual Stand-alone DVR CONTENTS 8-1. REMOTE PROGRAM OVERVIEW ..................133 8-2. INSTALLING THE PROGRAM TO PC ................134 8-3. INTERNET EXPLORER....................135 8-4. REMOTE HOST.......................137 8-4.1. S ........................139 ETUP 8-4.2. C ......................142 ONNECTION 8-4.3. C ........................143 APTURE 8-4.4. S ........................144 TATUS 8-4.5. R ........................145 EPLAY 8-4.6.

  • Page 133: Remote Program Overview

    8. REMOTE HOST PROGRAM 8-1. Remote Program Overview The Remote Host Program allows you to view live video, search archived video, control PTZ cameras and to set up the exact same menus as the DVR does. The DVR system can have up to 10 simultaneous Remote Connections. Each user can performs on the DVR system and will not affect the other users.

  • Page 134: Installing The Program To Pc

    Instruction Manual Stand-alone DVR 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as follows. How to install the program 1. Start the operating system (Windows 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive. 3.

  • Page 135: Internet Explorer

    8. REMOTE HOST PROGRAM 8-3. Internet Explorer When you are trying to use this function, it is highly recommended that the password should be turned ON in the SYSTEM menu not to enable unauthorized personnel to access your DVR system (See section 7-2.5). Up to 10 users can remotely access your DVR with the HOST NAME.
  • Page 136 Stand-alone DVR • Click on the following message. This site wants to install the following add-on: ‘DVR Master’ from ‘Clover Electronics USA’. If you trust the website and the add-on and want to install it, click here…. • Click the click install ActiveX Control…. on the pop-up screen and the following window will be displayed.

  • Page 137: Remote Host

    8. REMOTE HOST PROGRAM 8-4. Remote Host ① ② ③ ④ ⑤ ⑥ ⑦ ⑧⑨⑩ ⑪ ○ ○ ○ ○ ○ [Fig. 8-5 DVR Master]...
  • Page 138 Instruction Manual Stand-alone DVR Table. Description of Remote Host Program Button Minimization Button ① Close Button ② Current Time ③ ④ Connection Button Setup Button ⑤ Player Execution Button ⑥ Capture Button ⑦ Multi-Mode ⑧ Terminal Mode ⑨ E-map Button ⑩...

  • Page 139: 8-4.1. Setup

    8. REMOTE HOST PROGRAM 8-4.1. Setup ①version NO. ②COPY ③Network Image ④Video Enhance ○ Auto Save ○ Firmware Update [Fig. 8-6 HOST CONFIG window] ① Version number It represents the current version number of the Firmware. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy and the Live + Copy.
  • Page 140 Instruction Manual Stand-alone DVR ③ Network Image ▫ Size Choose a Size (Resolution) among D1, Half D1 and CIF you wish to display on the DVR Master by clicking the mouse. This setting does not affect the DVR. ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clicking the mouse.
  • Page 141 8. REMOTE HOST PROGRAM [Fig. 8-7 Firmware Files]...

  • Page 142: 8-4.2. Connection

    Instruction Manual Stand-alone DVR 8-4.2. Connection There are two ways to access the DVR through the DVR Master as follows. ▫ With Set Direct setting - Click the “CONNECT” button on the DVR Master and then the “Connect Dialog menu” as shown in [Fig.

  • Page 143: 8-4.3. Capture

    8. REMOTE HOST PROGRAM - Choose a Domain Name in the Name Lists and click the “CONNECT” button in order to access the DVR. - To register the Domain name (Host Name), refer to section 7-7.7.2 on page 125. [Fig. 8-8 Connect Dialog] 8-4.3.

  • Page 144: 8-4.4. Status

    Instruction Manual Stand-alone DVR 8-4.4. Status If the Status button on the DvrMaster is selected by clicking the mouse, the DvrMaster displays the DVR’s status related to connections of cameras, sensors, relay outputs and remaining HDD (Hard Disk Drive) capacity available for recording. Status button [Fig.

  • Page 145: 8-4.5. Replay

    8. REMOTE HOST PROGRAM 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in [Fig. 8-10] in the Multi mode only (refer to section 8-4.9.2). - Click the Replay button as shown in [Fig. 8-10] to playback the recorded data from the DVR system, and then the Replay Time Setup Window will be displayed.
  • Page 146 Instruction Manual Stand-alone DVR ▫ Playback Control Playback Control Buttons [Fig. 8-12 Playback control] Playback control buttons : Button for fast rewinding up to 128 times by repeatedly pressing. : Button for viewing previous frame in still image. : Play button. : Button for viewing the next frame in still image.

  • Page 147: 8-4.6. Copy

    8. REMOTE HOST PROGRAM 8-4.6. COPY It is possible to copy the recorded data from the DVR system to a client PC by using the Copy button in [Fig. 8-13] in the Multi mode only (refer to section 8-4.9.2). - Click the Copy button as shown in [Fig. 8-13] to copy the recorded data from the DVR system to a PC, and then the Copy Time Setup Window will be displayed.
  • Page 148 Instruction Manual Stand-alone DVR “ALL” in yellow represents that all the cameras are selected. The camera channel number(s) in yellow represents that the corresponding channel(s) are selected. - Click the Copy ( ) button and then the copying progressive bar as shown [Fig. 8-15] will show up.

  • Page 149: 8-4.7. Switch The Normal Screen To Full Screen

    8. REMOTE HOST PROGRAM 8-4.7. Switch the Normal Screen to Full Screen Click the “FULL SCREEN” button on the DvrMaster as shown [Fig. 8-16] and then the current ▫ screen size will be enlarged to fit the monitor’s screen size, but the resolution will be lowered. “FULL SCREEN”...

  • Page 150: 8-4.8. Speaker / Microphone

    Instruction Manual Stand-alone DVR 8-4.8. Speaker / Microphone ① ② ③ ④ ⑤ Speaker / Microphone [Fig. 8-18 Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse. ③...

  • Page 151: 8-4.9. Connection Mode

    8. REMOTE HOST PROGRAM 8-4.9. Connection mode There are two kinds of connection mode (See [Fig. 8-19]) on the DvrMaster. Select one of them by clicking the mouse depending on your application. Connection mode [Fig. 8-19 Connection Mode] 8-4.9.1. Terminal mode The functions of icons such as Recording, Play, Copy, Setup, System Status, Pan/Tilt, Display, Zoom and OSD on the bottom of the screen are identical to ones DVR system has.

  • Page 152: 8-4.9.2. Multi Mode

    Instruction Manual Stand-alone DVR 8-4.9.2. Multi mode It is impossible to control (Recording on/off, Setup, System Status, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 145-147), but the image of channel 16 will always display on the monitor and the DvrMaster. - Click the Multi mode button to choose the Multi mode as shown in [Fig.

  • Page 153: 8-4.10. Copy In The Terminal Mode (Not Available On This Version)

    8. REMOTE HOST PROGRAM 8-4.10. Copy in the Terminal mode (not available on this version) There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode. The recorded data will be saved in the Backup Files (Open Windows Explorer – click My Computer - click the Program Files –...
  • Page 154 Instruction Manual Stand-alone DVR [Fig. 8-22 Copying in the Terminal mode] [Fig. 8-23 Copy Completion]...

  • Page 155: 8-4.11. E-Map

    8. REMOTE HOST PROGRAM 8-4.11. E-Map E-Map enables users to display the cameras on the digital map for better monitoring. The digital map should be a BMP file and you can make it (the higher resolution the better) or use the E-map samples saved in the E-map folder (See Fig.8-26). E-Map mode [Fig.

  • Page 156: 8-4.11.2. Placement Of Cameras On The Map

    Instruction Manual Stand-alone DVR - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in [Fig. 8-27]. - To delete, right-click a saved eMap list and click “Delete eMap” on the pop-up window as shown in [Fig.

  • Page 157: 8-4.11.3. Usage Of Camera Position

    8. REMOTE HOST PROGRAM 8-4.11.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Double-click the image to display a full screen. - To change the camera position, click the image and drag the mouse and drop on the map.

  • Page 158: 8-4.12. Pan / Tilt & Preset

    Instruction Manual Stand-alone DVR 8-4.12. Pan / Tilt & Preset You can control the PTZ camera through DvrMaster. This feature is basically identical to what the DVR system has. Refer to section 6-7.7 PAN/TILT on page CHANNEL SELECT PAN / TILT FOCUS ZOOM PRESET / RUN...

  • Page 159: Player

    8. REMOTE HOST PROGRAM 8-5. PLAYER ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑫ ○ ○ ⑪ [Fig. 8-33 Player] Chart. Button of Player Program Status window (Play mode, Date, Time) ① Calendar ② Search button for replaying ③...
  • Page 160 Instruction Manual Stand-alone DVR ① Status window (Play mode, Date, Time) It indicates the play mode, date and time. [Fig. 8-34 Status window] ② Calendar It shows the date currently being replayed. [Fig. 8-35 Calendar] ④ Search button for Replaying - Click the Search button on the Player and the Browse for Folder will be displayed.
  • Page 161 8. REMOTE HOST PROGRAM - Click the Convert AVI button on the Player and the Convert AVI window will be displayed (See [Fig. 8-36] ) - Click on the SELECT button for Source on the Convert AVI window and the Convert AVI window or the DVR Player will be displayed (See [Fig.
  • Page 162 Instruction Manual Stand-alone DVR [Fig. 8-39 Select one of the Channels] [Fig. 8-40 Start Convert Button] How to play the AVI files By using Windows media player: - Click the OPEN button on the Convert AVI window and double click one of the AVI files to play. The AVI files will save in the AVI Files folder (Open Windows Explorer –...
  • Page 163 8. REMOTE HOST PROGRAM ⑤ Configuration [Fig. 8-41 Configuration window] If the “Fit to window” is selected in [Fig. 8-41], it will automatically fit to the Player window in [Fig. 8-33] (720x480) even though the recorded data is CIF (360x240) in the playback mode.
  • Page 164 Instruction Manual Stand-alone DVR click the Program Files – click DvrMaster – click Printed Files) in JPEG file format. [Fig. 8-42 Print command window] [Fig. 8-43 Print image] ⑧ Video Enhance Refer to section 6-8 on page 53. ⑨ Division button Select one of the following divisions while replaying.
  • Page 165 8. REMOTE HOST PROGRAM ⑪ Search slider for replaying The slider can be moved left and right by clicking the slider on the bar and dragging it or just click the bar to search the recorded data. [Fig. 8-46 Replay Search Slider] ⑫...
  • Page 166 Instruction Manual Stand-alone DVR...

  • Page 167: Appendix

    9. APPENDIX CONTENTS RECORDING TIME TABLE .....................168 FACTORY DEFAULT SETTINGS ....................169...

  • Page 168: Recording Time Table

    Instruction Manual Stand-alone DVR Recording time table HDD: 500GB Recording Resolution: Half D1 (720 x 240) Based on 8 cameras HOURS Each 30 fps 15 fps 10 fps 7 fps 5 fps 3 fps 2 fps (Total) (240fps) (120fps) (80fps) (56fps) (40fps) (24fps)

  • Page 169: Factory Default Settings

    APPENDIX Factory default settings (1) LIVE SCREEN 8 SPLIT OSD ON (2) TIME / DATE DISPLAY : ON TIME FORMAT : 24 HOUR DATE FORMAT : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOUNT PASSWORD : SET YOUR PASSWORD ( THE PASSWORD IS NULL ) PASSWORD ON/OFF : OFF (5) IR REMOTE ID (6) HDD OVERWRITE...
  • Page 170 Instruction Manual Stand-alone DVR DISPLAY : ON SEQ DISPLAY DWELL : 1 SEC (8) AUDIO AUDIO 1 : RELATED CAMERA CH 1, RECORD OFF, LEVEL 5 AUDIO 2 : RELATED CAMERA CH 2, RECORD OFF, LEVEL 5 AUDIO 3 : RELATED CAMERA CH 3, RECORD OFF, LEVEL 5 AUDIO 4 : RELATED CAMERA CH 4, RECORD OFF, LEVEL 5 (9) RECORD RECORD ICON DISPLAY : ON...
  • Page 171 APPENDIX (10) NETWORK TYPE : DYNAMIC PORT : 5800 SERVER 1 MODE : DISABLE SERVER 1 IP ADDRESS : 65.60.84.15 SERVER 1 PORT : 300 SERVER 2 MODE : DISABLE SERVER 2 IP ADDRESS : 65.60.84.15 SERVER 2 PORT : 300 SERVER SITE NAME : SXXXXXX (MAC ADDRESS) (11) VIDEO - CAMERA INPUT...
  • Page 172 Instruction Manual Stand-alone DVR...

  • Page 173: Faq

    10. FAQ CONTENTS I CANNOT LOGIN ........................174...

  • Page 174: Ican Not Login

    Instruction Manual Stand-alone DVR I can not login ▶ Please check if the link LED of DVR and LAN port of PC are lit. ▶ Please check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.) MY IP : xxx.xxx.xxx.xxx Check Target IP Address by clicking CONF button of PC host program.

  • Page 175: Limited 1Year Warranty

    11. Limited 1Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 1 year on parts and labor from the date of original purchase.

  • Page 176: How To Obtain Factory Service

    Instruction Manual Stand-alone DVR 12. How to obtain Factory Service • Original purchaser must fill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. • We will repair or replace, and return the system to the owner under this limited warranty.

This manual is also suitable for:

Lcd2088

Table of Contents