Clover HDV043 Instruction Manual page 21

EIA/TIA E568B Configuration
Signal Type
LAN Tx+
LAN Tx-
LAN Rx+
Not Used
Not Used
LAN Rx-
Not Used
Not Used
Example 1. Direct connection using cross over cable
This type of connection is used mostly for testing the DVR unit and for simple and short
cable connection. Since there is no devices providing DHCP services you must fix your IP
address to static IP to your DVR as well as your PC. If this is not done properly, then there
connectivity of the unit to the PC will not happen. First you must use cross over network
cable. This is a cable created with crossing pin 1 to 3, 2 to 6 then pin 3 to 1, 6 to 2.
21 | P a g e
Figure 11 Ethernet Cable Color Code
Pin Number
1
2
3
4
5
6
7
8
Figure 12 Ethernet Pin Configuration
Description
Ethernet Transmit Positive
Ethernet Transmit Negative
Ethernet Receive Positive
Not Used
Not Used
Ethernet Receive Negative
Not Used
Not Used