Pictbridge - Ricoh MPC 2800 AT-C2 Field Service Manual

13. Reinstall the HDD unit.
Clearing the NVRAM
When replacing the controller board for a model in which the HDD encryption unit has been installed and
a customer has lost the encryption key, clearing the NVRAM is required to recover the HDD encryption
unit.
1. Prepare an SD card which is initialized.
2. Make the "restore_key" folder in the SD card.
3. Make an "nvram_key.txt" file in the "restore_key" folder in the SD card.
4. Input "nvclear" into the "nvram_key.txt" file.
5. Turn on the main power switch.
6. Confirm that the prompt on the LCD tells you to install the SD card (storing the encryption key) in the
machine.
7. Turn off the main power switch.
8. Insert the SD card that contains "nvclear" into slot 2.
9. Turn on the main power switch, and the machine automatically restores the encryption key in the flash
memory on the controller board.
10. Turn off the main power switch after the machine has returned to normal status.
11. Remove the SD card from slot 2.
12. Turn on the main power switch.
13. Initialize the NVRAM (SP5801-001) and HDD unit (SP5832-001) with SP mode.
14. The user must enable the HDD encryption unit with a user tool.

PictBridge

• Unplug the main machine power cord before you do the following procedure.
• You must install the PictBridge option in SD Card slot 1. However, the Postscript option and the data
overwrite security unit option are also installed in SD Card slot 1. You must do the SD Card Appli
move procedure first if you have the postscript or data overwrite security unit option installed and you
want to install the PictBridge unit.
You must install the USB Host Interface when using the PictBridge unit.
Controller Options
2
143