Ricoh MPC 2800 AT-C2 Field Service Manual page 473

No. Result
0 Not done
Completed
1
successfully
Cannot detect
2
patterns
Fewer lines on the
3 pattern than the
target
More lines on the
4 pattern than the
target
Out of the
5
adjustment range
6-9 Not used
• For details, see the "Troubleshooting Guide - Line Position Adjustment" section.
Description
Line position adjustment has not been done.
Line position adjustment has correctly been done,
ID sensors have not detected the patterns for line position
adjustment.
The patterns, which ID sensors have detected, are not
enough for line position adjustment.
Not used in this machine.
ID sensors have correctly detected the patterns for line
position adjustment, but a shift of patterns is out of
adjustable range.
-
Process Control Error Conditions
Note
-
-
See Note
See Note
-
See Note
-
4
117