Cisco PA-MC-2T3+ Installation And Configuration Manual page 47

Chapter 3 Removing and Installing Port Adapters
Figure 3
1 Port adapter lock lever
Step 1 Remove any port adapter blank panel that may be in place.
Move the lock lever on the top left corner of the Port Adapter Jacket Card until the port adapter blank
a.
panel releases.
Pull the port adapter blank panel from the Port Adapter Jacket Card.
b.
Figure 4
1
Port adapter lock lever
Insert the port adapter into the Port Adapter Jacket Card until it is fully seated.
Step 2
Move the port adapter lock lever to the locked position.
Step 3
OL-3526-05
Removing the Port Adapter Blank Panel
Cisco 7200
Series VXR
1
Installing a Port Adapter in the Port Adapter Jacket Card
Cisco 7200
Series VXR
1
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
Port Adapter Removal and Installation
ETHERNET-10BFL
PORT ADAPTER JACKET CARD
PORT ADAPTER JACKET CARD
SA-VAM2+
ENCRYPTION/COMPRESS ION
ETHERNET-10BFL
3-7