Cisco PA-MC-2T3+ Installation And Configuration Manual page 54

Cables and Connectors
Figure 3-7
Step 2 Attach the network ends of your two 75-ohm coaxial cables to your external T3 equipment as follows:
Attach the coaxial cable from the PA-MC-2T3+ TX port to the RX port on your external T3
•
equipment.
Attach the coaxial cable from the PA-MC-2T3+ RX port to the TX port on your external T3
•
equipment.
This completes the procedure for 75-ohm coaxial cable attachment on PA-MC-2T3+ port adapters.
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
3-14
Attaching 75-Ohm, 734A Coaxial Cables to a PA-MC-2T3+ Port Adapter
To RX port
on external
T3 equipment
To TX port
on external
T3 equipment
Chapter 3 Removing and Installing Port Adapters
MULTI-CHANNEL 2T3
0
BNC
cables
+
1
OL-3526-05