Cisco PA-100VG Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Adapter
  5. PA-100VG
  6. Installation and configuration manual
Cisco PA-100VG Installation And Configuration Manual

Cisco PA-100VG Installation And Configuration Manual

Anylan port adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Text Part Number:
OL-3583-01
PA-100VG AnyLAN Port Adapter
Installation and Configuration
Product Numbers: PA-100VG and PA-100VG=
This configuration note describes the installation and configuration of the 100VG
100-mega-bit-per-second (Mbps) AnyLAN port adapter. The 100VG port adapter (PA-100VG) can
be used in the Cisco 7200 series routers, and on the second-generation Versatile Interface Processor
(VIP2) in the Cisco 7500 series and Cisco 7000 series routers.
Note
conjunction with the configuration note Second-Generation Versatile Interface Processor (VIP2)
Installation and Configuration (Document Number 78-2658-xx), which shipped with your VIP2.
For Cisco 7200 series router users, use this configuration note in conjunction with the Cisco 72xx
Installation and Configuration Guide that shipped with your Cisco 7200 series router.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997–1998
Cisco Systems, Inc.
All rights reserved.
For VIP2/Cisco 7000 series/Cisco 7500 series users, use this configuration note in
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco PA-100VG

Summary of Contents for Cisco PA-100VG

  • Page 1 Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (Document Number 78-2658-xx), which shipped with your VIP2. For Cisco 7200 series router users, use this configuration note in conjunction with the Cisco 72xx Installation and Configuration Guide that shipped with your Cisco 7200 series router.
  • Page 2 — What Is the 100VG Port Adapter?, page 7 The following sections include information specific to the 100VG port adapter’s use with the VIP2 in Cisco 7000 series and Cisco 7500 series routers, and its use in the Cisco 7200 series routers: —...
  • Page 3 Port Adapter Locations on the VIP2 and in the Cisco 7200 Series Router, page 9 Software and Hardware Prerequisites The 100VG port adapter requires that the host Cisco 7000 series, Cisco 7200 series, or Cisco 7500 series routers are running Cisco IOS Release 11.1(10)CA or later. The 100VG port adapter is also supported in Cisco IOS Release 11.2(7)P or later, for the Cisco router series listed.

  • Page 4: Safety Guidelines

    Port Adapter Installation Prerequisites To prevent system problems, the VIP2 requires that the Cisco 7000 series router has the 7000 Series Caution Route Switch Processor (RSP7000) and the 7000 Series Chassis Interface (RSP7000CI) installed. The VIP2 will not operate properly with the Route Processor (RP), Switch Processor (SP), or Silicon Switch Processor (SSP) installed in the Cisco 7000 series router.
  • Page 5 Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo. PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 6 • When removing a component, use any available ejector levers or captive installation screws to release the bus connectors from the backplane or midplane. 6 PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 7 1 and 10 megohms. What Is the 100VG Port Adapter? This section contains information specific to the 100VG port adapter and its use with Cisco 7000 series, Cisco 7200 series, and Cisco 7500 series routers. The following sections discuss information specific to the 100VG port adapter: •...
  • Page 8 Cisco 7500 series routers, and with Cisco 7000 series routers using the RSP7000. The 100VG port adapter can also be used in Cisco 7200 series routers. There are no chassis or port adapter slot restrictions for the 100VG port adapter. 100VG port adapters are available as spare parts (as PA-100VG=).
  • Page 9 IEEE 802.12 interfaces. The RJ-45 connection does not require an external transceiver and can use Category 3 and Category 5 unshielded twisted-pair (UTP) cable with RJ-45 terminations. (Cisco Systems does not supply Category 3 and Category 5, UTP RJ-45 cables; these cables are available from commercial cable vendors.)
  • Page 10 Cisco 7010 and Cisco 7505 chassis, the VIP2 is installed horizontally. Figure 5 shows a Cisco 7206 with port adapters installed. In the Cisco 7206, port adapter slot 1 is in the lower left position, and port adapter slot 6 is in the upper right position. (The Cisco 7204 is not shown, but has four port adapter slots;...

  • Page 11: Table Of Contents

    This section describes the 100VG port adapter and its use with the VIP2 and provides the following additional information that is specific to the 100VG port adapter and its use on the VIP2 in Cisco 7000 series and Cisco 7500 series routers: •...

  • Page 12: Port Adapter Slot

    Note Each port adapter has one Phillips-head screw that secures it to its port adapter slot. We strongly recommend that the following procedures be performed by a Cisco-certified service provider; however, this is not a requirement. While the VIP2 supports online insertion and removal, individual port adapters do not. To replace port adapters, you must first remove the VIP2 from the chassis, then install or replace port adapters as required.

  • Page 13: Figure 7

    If you removed a port adapter, place it in an antistatic container for safe storage or Step 8 shipment back to the factory. If you removed a blank port adapter, no special handling is required; however, store the blank port adapter for potential future use. PA-100VG AnyLAN Port Adapter Installation and Configuration...

  • Page 14: Port Adapter Slot

    Figure 9. Figure 9 Aligning a Port Adapter in a Port Adapter Slot Carrier Upper edge Lower edge 14 PA-100VG AnyLAN Port Adapter Installation and Configuration...

  • Page 15: Port Adapter Slot

    Installation and Configuration [Document Number 78-2658-xx], which shipped with your VIP2.) Step 14 If disconnected, reconnect the interface cables to the port adapters. This completes the procedure for installing a new port adapter or replacing a port adapter on a VIP2. PA-100VG AnyLAN Port Adapter Installation and Configuration...

  • Page 16: Attaching 100Vg Port Adapter Interface Cables

    VIP2 and 100VG Port Adapters Attaching 100VG Port Adapter Interface Cables RJ-45 cables are not available from Cisco Systems; they are available from outside commercial cable vendors. Use the following procedure to connect RJ-45 cables to the 100VG port adapter: Attach the Category 5 UTP cable directly to the RJ-45 port on the 100VG port adapter.

  • Page 17: Configuring The 100Vg Anylan Interfaces

    Figure 12 shows the port adapter slots and interface ports of a sample Cisco 7505 system. On a 100VG port adapter interface port numbers are always 0. For example, the 100VG AnyLAN interface port on a 100VG port adapter in the first port adapter slot in chassis slot 3, would be 3/0/0.

  • Page 18: Configuring An Interface

    The example that follows is for the interface on the first port adapter on a 100VG port adapter in interface processor slot 1: Router(config)# interface vg 1/0/0 18 PA-100VG AnyLAN Port Adapter Installation and Configuration...

  • Page 19: Checking The Configuration

    If the interface is down and you configured it as up, or if the displays indicate that the hardware is not functioning properly, ensure that the network interface is properly connected and terminated. If you still have problems bringing the interface up, contact a service representative for assistance. PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 20 0 vg alignment error, 0 vg balance error 0 vg invalid ipm error, 0 vg symbol error 0 vg skew error, 0 vg frame delimit error 0 vg high priority packets, 0 vg high priority octects 20 PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 21 Router uptime is 4 minutes System restarted by reload System image file is “biff/rsp-jv-mz.111”, booted via tftp from 1.1.0.1 cisco RSP1 (R4600) processor with 16384K bytes of memory. R4600 processor, Implementation 32, Revision 2.0 Last reset from power-on G.703/E1 software, Version 1.0.
  • Page 22 100VG port adapter installed and configured: Router# sh startup-conf (additional display text omitted) hostname Router boot system biff/rsp-jv-mz.111 8 interface VG-AnyLAN3/1/0 ip address 1.1.1.17 255.0.0.0 no mop enabled no mop sysid (additional display text omitted) 22 PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 23 (powered on); then repeat the ping command. For complete descriptions of interface subcommands and the configuration options available for 100VG-related interfaces, and which support 100VG functionality, refer to the publications listed in the section “If You Need More Information” on page 2. PA-100VG AnyLAN Port Adapter Installation and Configuration...

  • Page 24: Port Adapter

    Cisco 7200 Series and 100VG Port Adapters The 100VG port adapters are used in the Cisco 7200 series routers and can be installed in any of the available port adapter slots. Figure 13 shows a 100VG port adapter installed in port adapter slot 3 of a Cisco 7206.
  • Page 25 Removing a Port Adapter Use the following standard procedure to remove a port adapter from a Cisco 7200 series router: Step 1 Attach an ESD-preventative wrist strap between you and an unfinished chassis surface.

  • Page 26: Slot

    This completes the procedure for removing a port adapter from a Cisco 7200 series router. Replacing a Port Adapter Use the following standard procedure to install a new port adapter in a Cisco 7200 series router: Attach an ESD-preventative wrist strap between you and an unfinished chassis surface.
  • Page 27 Port adapter lever (locked Note: This adapter installation applies to any port or service position) adapter. This completes the procedure for installing a new port adapter in a Cisco 7200 series router. PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 28 Cisco 7200 Series and 100VG Port Adapters Attaching 100VG Port Adapter Interface Cables 100VG RJ-45 cables are not available from Cisco Systems; they are available from outside commercial cable vendors. Use the following procedure to connect 100VG cables to a 100VG port adapter: Attach the 100VG RJ-45 cable directly to the 100VG port on the 100VG port adapter.
  • Page 29 Whether the new interfaces will use bridging For a summary of the configuration options available and instructions for configuring the 100VG interfaces on a Cisco 7200 series router, refer to the appropriate configuration publications listed in the section “If You Need More Information” on page 2.
  • Page 30 Cisco 7200 Series and 100VG Port Adapters Figure 19 shows the port adapter slots and interface ports of a Cisco 7206. The port adapter slot numbers start with 1 and continue through 6 (slot 0 is always reserved for the Fast Ethernet port on the I/O controller—if present).
  • Page 31 If the interface is down and you configured it as up, or if the displays indicate that the hardware is not functioning properly, ensure that the network interface is properly connected and terminated. If you still have problems bringing the interface up, contact a service representative for assistance. PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 32 0 output buffer failures, 0 output buffers swapped out 0 vg alignment error, 0 vg balance error 0 vg invalid ipm error, 0 vg symbol error 0 vg skew error, 0 vg frame delimit error 32 PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 33 Page 5 - MMU Registers: rx mem stop addr=0xFF03, tx mem stop addr=0xFF07 MC68852 PCI registers: bus_no=7, device_no=0 CFID=0x0005101A, CFCS=0x02800005, CFRV=0x02000000, CFLT=0x0000F800 CBIO=0x00008001, CBMA=0x00000000, CFIT=0x20080100, CFDA=0x00000008 PA-100VG AnyLAN Port Adapter Installation and Configuration...
  • Page 34 Router uptime is 22 minutes System restarted by reload System image file is “biff/c7200-j-mz.111”, booted via tftp from 1.1.0.1 cisco 7206 (NPE150) processor with 12288K/4096K bytes of memory. R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache) Last reset from power-on Bridging software.

  • Page 35: Obtaining Documentation

    Obtaining Documentation These sections explain how to obtain documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com Translated documentation is available at this URL: http://www.cisco.com/public/countries_languages.shtml...

  • Page 36: Documentation Feedback

    We appreciate your comments. Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site.
  • Page 37 Cisco TAC Web Site You can use the Cisco TAC Web Site to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to this URL: http://www.cisco.com/tac...
  • Page 38 CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco...

Table of Contents