Table of Contents
Advertisement
1. Picture menu
Some picture adjustments are available only when certain input sources are in use. Unavailable
adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Application Mode
(PC/DVI-A:
Presentation;
YPbPr/ S-Video/
Video/ DVI-D: Home
Theater)
Keystone
(0)
Color Temp
(depends on the
selected Application
mode)
Brightness
(depends on the
selected input
source)
Contrast
(depends on the
selected input
source)
Color
(depends on the
selected input
source)
Tint
(50)
32
Operation
DESCRIPTION
Pre-defined application modes are provided so you can optimize your projector image
set-up to suit your program type.
You can use the remote control MODE button to select a predefined application mode
as well. See
"2. Selecting an application mode" on page 28
Corrects any keystoning of the image. See
details.
Sets a preferred color temperature. See
for details.
Adjusts the brightness of the image. See
details.
Adjusts the degree of difference between dark and light in the image. See
contrast" on page 29
for details.
Increases or decreases the color intensity of the image. See
page 29
for details.
Adjusts the color tones of the image. See
When a Video or S-Video signal is connected, the function is only available
with NTSC system selected.
for details.
"Correcting keystone" on page 25
"5. Selecting a color temperature" on page 29
"1. Adjusting brightness" on page 28
"3. Adjusting color" on
"4. Adjusting tint" on page 29
for
for
"2. Adjusting
for details.
Advertisement
Table of Contents
