All measurements are approximate and may vary from the actual sizes. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics.
Projector specifications All specifications are subject to change without notice. Optical Control Resolution 1920 (H) x 1080 (V) Type Mini-B x 1 (Service download) Display system RS-232 serial control 1-CHIP DMD 9 pin x 1 Lens IR receiver x 1 F = 2.4, f = 3.35 mm Input terminals Lamp...
Page 10
For further information, please refer to the enclosed User Manual.