Table of Contents
Advertisement
2. Pro-Picture menu
Some picture adjustments are available only when certain input sources are in use. Unavailable
adjustments are not shown on the screen.
FUNCTION
DESCRIPTION
(default setting /
value)
The grayscale video signal is measured in IRE units. In some areas which use NTSC
TV standard, the grayscale is measured from 7.5 IRE (black) to 100 IRE (white);
IRE
however, in other areas which use PAL equipment or Japanese NTSC standard, the
(0)
grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest that you
check the input source if it is started with 0 IRE or 7.5 IRE, then select accordingly.
There are three aspect ratio settings. See
details.
1. 16:9 (for a wide screen)
Aspect Ratio
(16:9)
being fed an appropriate 16:9 aspect signal. See
Video source device" on page 20
size" on page 13
Adjusts the horizontal position of the
projected image.
H Position
(0)
Adjusts the vertical position of the
projected image.
V Position
(0)
This function allows you to adjust the clock phase to reduce
Phase
image distortion.
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
H Size
(0)
Adjusts the image to make it look sharper or softer.
Sharpness
(15)
2. Real
16:9 aspect ratio is only sourced through the Component Video input when
for details.
"1. Selecting the aspect ratio" on page 27
3. 4:3 (for a standard screen)
"Connecting a Component
and
"Obtaining a preferred projected image
-30
-30
for
+30
+30
Operation
33
Advertisement
Table of Contents
