Table of Contents
Advertisement
Correcting keystone
Keystoning refers to the situation where the projected image is
noticeably wider at either the top or bottom. It occurs when the
projector is not perpendicular to the screen.
To correct this, besides adjusting the projecting angle of the
projector, you will need to manually correct it following ONE of
these steps.
• Press
/
or
/
bar labelled Keystone. Press
top of the image. Press
bottom of the image.
• Press
or
on the remote control to display the status bar labelled Keystone, then press
keystoning at the top of the image or press
• Press
MENU on the projector or MENU on the remote control. Go to
adjust the values by pressing
For example,
Keystone
0
Keystone
0
on the projector to display the status
/
to correct keystoning at the
/
to correct keystoning at the
to correct keystoning at the bottom of the image.
/
/
/
on the projector or
•
Press
/
on the projector or
•
Press
on the remote control or
•
Press
/
on the projector or
remote control when you are in the Picture -->
Keystone menu.
•
Press
/
on the projector or
•
Press
on the remote control or
•
Press
/
on the projector or
remote control when you are in the Picture -->
Keystone menu.
Picture > Keystone and
Left/
Right on the remote control.
Left on the
Keystone
Right on the
Keystone
Operation
C
C
T
to correct
-6
+6
25
Advertisement
Table of Contents
