Table of Contents
Advertisement
Controls and functions
Projector
1.
Power (See
I
Selecting the aspect ratio" on page 27
Toggles the projector between standby mode and
on. When the projector is in standby, press once to
turn the projector on.
When the projector is on, press twice to turn the
projector to standby.
2.
ASPECT (See
page 27
for details.)
Selects an image aspect ratio to suit the input
signal.
3.
MODE (See
details.)
Depending upon which input signal is selected,
there are several picture setup options available.
4.
SOURCE (See
for details.)
Sequentially selects the input signal Video, S-
Video, DVI-A, DVI-D, Component Video 1, or
Component Video 2.
5.
AUTO (See
24
for details.)
Automatically determines the best picture timings
for the displayed image. This function only works
when a computer source is connected.
10
Introduction
13
14
7
8
1
9
2
3
11
"Start up" on page 23
and
for details.)
"1. Selecting the aspect ratio" on
"Application Mode" on page 32
"Switching input signal" on page 23
"Auto-adjusting the image" on page
6.
Lamp indicator light (See
page 41
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
7.
Temperature warning light (See
tors" on page 41
12
6
Flashes red if the projector's temperature
becomes too high.
5
8.
Power indicator light (See
page 41
10
Lights up or flashes when the projector is
under operation.
4
9.
Keystone
10.
Keystone
keystone" on page 25
"1.
When the on-screen menu is not activated,
#9 and #10 function as Keystone
correction hot keys.
11.
MENU (See
page 30
Turns on the on-screen display control
menu.
12.
EXIT
Exits and saves the menu settings.
When the on-screen menu is activated, the
for
#9 to #12 buttons are used as directional
arrows to select the desired menu items
and to make adjustments.
13.
Focus ring (See
size and clarity" on page 24
Adjusts the focus of the projected image.
14.
Zoom ring (See
size and clarity" on page 24
Adjusts the size of the image.
"Indicators" on
for details.)
"Indica-
for details.)
"Indicators" on
for details.)
/
Left
/
Right (See
"Correcting
for details.)
"Using the menus" on
for details.)
"Fine-tuning the image
for details.)
"Fine-tuning the image
for details.)
Advertisement
Table of Contents
