Table of Contents
Advertisement
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is higher than 3000 feet above sea level,
or is hotter than 40
°C
shutdown.
To activate the High Altitude Mode, select On by pressing
confirmation message displays. Press AUTO.
Next time you turn on the projector, it will show a message pictured below as a reminder during the start-up.
Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan
speed necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-down
symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to
High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under
any and all harsh or extreme conditions.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not
affect the projection settings, operation, or performance.
• OSD Time in Setting menu sets the length of time the OSD will remain active after your last button press. The
time length ranges from 5 to 100 seconds.
• Language in Advance menu sets your familiar language for the on-screen menus. Use
projector or remote control to select your language.
• Splash Screen in Advance menu allows you to set a preferred logo screen to be displayed during projector
start-up.
26
Operation
, or whenever the projector will be used for extended periods of time (>10 hours) without
We recommend you use the High Altitude Mode by selecting On
when your environment is higher than 3000 feet, or is hotter than 40°C.
Do you want to turn on High Altitude Mode?
Yes Auto
High Altitude Mode
This mode is used for protecting projector from extreme environment and may cause high
Left/
Right on the projector or remote control. A
No
Current Status
On
fan speed.
Left/
Right on the
Advertisement
Table of Contents
