Troubleshooting
5.1
Status LED overview
LED status indicators
The Power Module has number of dual-colour LEDs which are designed to indicate the
operational state of the Inverter. The LEDs are used to indicate the status of the following
states:
● General fault conditions
● Communication status
The location of the various LEDs on the Power Module and Communications and Power
Interface (which is attached to the terminal housing) are shown in the figure below.
Figure 5-1
Status LED locations
SINAMICS G110M Getting Started
Getting Started, 09/2014, FW V4.7, A5E31298643B AC
5
91