Siemens SINAMICS G110M Getting Started page 86

Commissioning
4.8 Basic commissioning with STARTER
STARTER offers two options:
● Change the settings using the appropriate screen forms - our recommendation.
①
②
If you change the settings using screen forms you do not need to know the parameter
numbers.
● You change the settings using the parameters in the expert list.
If you wish to change the settings using the expert list, you need to know the
corresponding parameter number and its significance.
Saving settings so that they are not lost when the power fails
The inverter initially only saves changes temporarily. You must do the following so that the
inverter saves your settings securely in the event of a power failure.
Procedure
Proceed as follows to save your settings in the inverter so that they are not lost when the
power fails:
1. Mark the appropriate drive in the project navigator.
2. Click the
You have saved your settings securely in the inverter in case of a power failure.
Go offline
You can now exit the online connection after the data backup (RAM to ROM) with
"Disconnect from target system".
86
Navigation bar: For each inverter function, select the corresponding screen form.
tabs: Switch between screen forms.
Save (RAM to ROM) button.
SINAMICS G110M Getting Started
Getting Started, 09/2014, FW V4.7, A5E31298643B AC