Siemens SINAMICS G110M Getting Started page 60

Installation
3.3 Electrical Installation
Figure 3-11 SINAMICS G110M PM240M connections diagram
Figure 3-12
Note
Adaption of inputs and outputs
Further adaption of the inputs and outputs of the Inverter are possible, please refer to
relevant section in the SINAMICS G110M Operating Instructions for further information.
The internal motor and power connections on the G110M system are located inside the
Control Unit and motor housing. The connections are shown in the following figure.
Figure 3-13 Control Unit motor and power connections
60
24 V glanded input and output connections
SINAMICS G110M Getting Started
Getting Started, 09/2014, FW V4.7, A5E31298643B AC