Siemens SINAMICS G110M Getting Started page 14

Distributed converter for simogear geared motors

Hide thumbs Also See for SINAMICS G110M:

Table of Contents

Safety instructions

1.5 Residual risks of power drive systems

Note

The components must be protected against conductive contamination (e.g. by installing them

in a control cabinet with degree of protection IP54 according to IEC 60529 or NEMA 12).

Assuming that conductive contamination at the installation site can definitely be excluded, a

lower degree of cabinet protection may be permitted.

For more information about residual risks of the components in a drive system, see the

relevant sections in the technical user documentation.

SINAMICS G110M Getting Started

Getting Started, 09/2014, FW V4.7, A5E31298643B AC

Table of Contents