Siemens SINAMICS G110M Getting Started page 50

Installation
3.3 Electrical Installation
The standby currents for all the possible combinations of the SINAMICS G110M are given in
the following table:
Table 3- 3
Device
G110M FSA (0.37 ... 1.5 kW)
G110M FSB (2.2 ... 4.0 kW)
G110 FSA + Optional 24 V PSU
or External 24 V
G110 FSB + Optional 24 V PSU
or External 24 V
PROFIBUS / USS CM only
PROFINET CM only
* The optional 24 V PSU is an orderable item which is designed specifically for use with the
SINAMICS G110M converter. The 24 V PSU is fitted to the terminal housing as shown in Installing
the 24V power supply (Page 46). The external 24 V supply is sourced by the user and is connected
to the converter through the 24 V connections as shown in Connection and cables (Page 53).
50
SINAMICS G110M Standby currents
Power supply
Mains only
Mains only
Mains + Optional 24 V PSU or
External 24 V*
Mains + Optional 24 V PSU or
External 24 V*
External 24 V only* (mains sup-
ply switched off)
External 24 V only* (mains sup-
ply switched off)
Standby current (mA)
325
445
340
460
235
290
SINAMICS G110M Getting Started
Getting Started, 09/2014, FW V4.7, A5E31298643B AC