Replacing the VR heat sink
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align and place the VR heat sink on the system board.
2
Tighten the two captive screws that secure the VR heat sink to the system board.
Post-requisites
1
Follow the procedure from step 10 to step 11 in
2
Replace the
left-side
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
cover.
computer. After working inside your computer, follow the instructions
"Replacing the power-supply
unit".
69