Table of Contents
Advertisement
4
Lift the VR heat sink off the computer.
5
Disconnect the processor-cooling assembly cables from the system board.
6
In reversed order (as indicated on the processor cooler), loosen the four captive screws that secure the processor cooler to
the system board.
NOTE: If your are using an electric screwdriver, torque the screws at 6.9 +/-1.15 kilogram-force centimeter (6
+/-1 pound force inch).
7
Lift the processor-cooling assembly along with the cables off the computer.
54
Hide quick links:
Advertisement
Table of Contents
