Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell Alienware Aurora R8 Service Manual

Replacing the solid-state drive

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

Procedure

1 Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2 Insert the solid-state drive at a 45-degree angle into the system board.
3 Press the other end of the solid-state drive down and replace the screw (M2x2.5) that secure the solid-state drive to the
system board.

Post-requisites

1 Replace the graphics
2 Follow the procedure from step 10 to step 11 in
3 Replace the left-side
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
card.
cover.
computer. After working inside your computer, follow the instructions
"Replacing the power-supply unit".
63