Table of Contents
Advertisement
Replacing the top-chassis fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align the holes on the top-chassis fan with the holes on the top-chassis fan bracket.
2
Insert the ends of the rubber grommets through the holes at each corner of the fan.
3
Align the grommets in the fan with the holes at each corner of the top-chassis fan bracket and pull through until they snap
into place.
4
Route the top-chassis fan cable through the routing guide on the bracket.
5
Align the tabs on the top-chassis fan with the slots on the chassis and slide the fan until it snaps into position.
6
Replace the screw (#6-32 X 1/4") that secures the top-chassis fan to the chassis.
86
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
Hide quick links:
Advertisement
Table of Contents
