Replacing The Vr Heat Sink - Dell XPS 8930 Service Manual

Replacing the VR heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1 Align and place the VR heat sink on the system board.
2 Tighten the captive screws that secure the VR heat sink to the system board.
Post-requisites
1 Replace the blower and heat-sink
2 Follow the procedure from step 9 to step 10 in
unit".
3 Replace the right-side
92
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
"Replacing the power-supply
Before