Replacing The Vr Heat Sink; Procedure; Post-Requisites - Dell D27M Service Manual

Replacing the VR heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the three captive screws on the VR heat sink with the slots on the system
board.
2 Tighten the captive screws that secure the VR heat sink to the system board.

Post-requisites

Replace the right-side
74
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before