WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align and place the VR heat sink on the system board.
2
Tighten the captive screws that secure the VR heat sink to the system board.
Post-requisites
1
Replace the
blower and heat-sink
2
Follow the procedure from step 9 to step 10 in
3
Replace the
right-side
cover.
74
Replacing the VR heat sink
Replacing the VR heat sink
computer. After working inside your computer, follow the instructions in
assembly.
"Replacing the power-supply
www.dell.com/
unit".
37
After working inside