Turning The Power On/Off - Korg Minilogue XD Owner's Manual

Connecting the AC adapter
1.
Connect the DC plug of the included AC adapter to the DC 9V jack located on the rear panel
of the minilogue xd.
Be sure to use only the included AC adapter. Using any other AC adapter may cause mal-
functions.
2.
Hook the AC adapter cord onto the cord hook.
Do not use excessive force when pulling the cord off the hook. Doing so may damage the
plug.
3.
Connect the plug of the AC adapter to an AC outlet.
Be sure to use an AC outlet of the correct voltage for your AC adapter.
Connecting audio devices
Be sure that all of your devices are turned off when making connections. Making connec-
tions with the power still turned on may damage the device or speaker.
•
Connect the OUTPUT L/MONO, R jacks on the minilogue xd to your powered monitor
speaker, mixer or other audio device.
To output monaural sound, use the OUTPUT L/MONO jack.
•
To use headphones, connect the plug on your headphones to the headphones jack.
Adjust the volume levels for the OUTPUT jacks and headphones jack using the MASTER
Tip:
knob.

Turning the power on/off

Turning the minilogue xd on
Make sure that both the minilogue xd and any external output devices such as powered monitor
speakers are turned off, and turn the volume of all devices all the way down.
1.
Hold down the Power switch on the rear panel of the minilogue xd; once the "minilogue xd"
logo appears in the display, take your finger off the Power switch.
The word "Tuning..." will appear on the display, and the instrument will enter Tuning mode
for the analog synthesizer circuit, for around 15 seconds. After this, the minilogue xd will enter
to Play mode.
2.
Turn on any external output devices such as powered monitor speakers.
3.
Adjust the volume of your external output equipment, and adjust the minilogue xd's volume
using the MASTER knob.
7