Korg Minilogue XD Owner's Manual page 18

NOISE
Noise is used to create percussion instrument sounds, or sound effects such as surf.
Select one of the four noise generators using the TYPE knob.
Move the SHAPE knob to make changes in the sound.
TYPE knob
Select the noise generator to use.
The noise generator name will be indicated on the MULTI ENGINE display.
High: A high-pass filter will be used.
Low: A low-pass filter will be used.
Peak: A peak filter (bandpass filter) will be used.
Decim: A decimator will be used.
SHAPE k nob
Set the noise generator parameter to make changes to the sound.
The parameters differ depending on the noise generator that you select using the TYPE knob, with
the following effects.
SHAPE knob effects
Type
High CUTOFF
(SHAPE knob)
Low CUTOFF
(SHAPE knob)
Peak BANDWIDTH
(SHAPE knob)
Decim RATE
(SHAPE knob)
KEY TRACK
(SHIFT button+SHAPE knob)
[High/Low/Peak/Decim]
Parameter
[10.0Hz...21.0kHz]
Adjusts the cutoff frequency of the HPF.
[10.0Hz...21.0kHz]
Adjusts the cutoff frequency of the LPF.
[110.0Hz...880.0Hz]
Adjusts the peak characteristic bandwidth.
[240Hz...48.0kHz]
Adjusts the sample rate.
[0.0%...100.0%]
Adjusts the depth of the sample rate via keyboard
tracking.
18
Effect