Enable or disable the steps.
• Press buttons 1–16 to enable (the button will light) or disable (the button will go dark) the
steps.
If a note or motion sequence is not recorded for a step, you cannot enable that step.
Note:
3.
After you finish step editing, press the PLAY button to check your sequence data.
The PLAY button will light.
Other editing functions
Use the SEQ EDIT mode when setting the step length, step resolution and other parameters dur-
ing sequence step recording, as well as for deleting sequence data, or for editing or deleting mo-
tions. See "SEQ EDIT mode" (p.37) for details.
29