Korg Minilogue XD Owner's Manual page 44

Button 13 (USER DUMP)
User Scale 1...6
Transmits the microtunings that were edited in USER SCALE 1–6, button 10 as general SysEx mes-
sages.
Press button 13 to select the microtuning to transmit as SysEx. Turn the PROGRAM/VALUE knob
until "Press WRITE" is indicated in the display, and then press the WRITE button.
User Octave 1...6
Transmits the microtunings that were edited in USER OCTAVE 1–6, button 11 as general SysEx
messages.
Press button 13 to select the microtuning to transmit as SysEx. Turn the PROGRAM/VALUE knob
until "Press WRITE" is indicated in the display, and then press the WRITE button.
Button 15 (ALL DUMP)
This button transmits the programs, live set and global SysEx data of this instrument to another
minilogue xd, MIDI data filer, computer or other compatible device that is connected.
All Dump (USB)
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the display.
Press the WRITE button to transmit the MIDI data dump via the USB B port. The data will take
around 10 seconds to transmit, and the message "Transmitting" will be shown in the display dur-
ing this time.
If the USB cable is not connected, or if the MIDI IN port on the computer is not open, the
data will not be transmitted.
All Dump (MIDI)
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the display.
Press the WRITE button to transmit the MIDI data dump via the MIDI OUT connector. The data
will take around 30 seconds to transmit, and the message "Transmitting" will be shown in the
display during this time.
44