Program Edit Mode - Korg Minilogue XD Owner's Manual

PROGRAM EDIT mode

Button 4 (JOYSTICK)
This configures the joystick settings.
X+ Bend Range
Specifies how much pitch bend will be applied when moving the joystick to the right.
X– Bend Range
Specifies how much pitch bend will be applied when moving the joystick to the left.
Y+ Assign
This sets the parameters that are assigned to the joystick when moved upwards.
The parameters that can be assigned as shown below.
GATE TIME
PORTAMENTO
VOICE MODE DEPTH
VCO1 PITCH
VCO1 SHAPE
VCO2 PITCH
VCO2 SHAPE
CROSS MOD
MULTI SHAPE
VCO1 LEVEL
VCO2 LEVEL
MULTI LEVEL
CUTOFF
RESONANCE
A.EG ATTACK
Y+ Range
This sets how much the parameters are changed when the joystick is moved upwards.
Y– Assign
This sets the parameters that are assigned to the joystick when moved downwards.
The parameters that can be assigned are the same as those for Y+ Assign. See "Y+ Assign" (p.32)
for details.
Y– Range
This sets how much the parameters are changed when the joystick is moved downwards.
[Off, 1 Note...12 Note]
[Off, 1 Note...12 Note]
[GATE TIME...DELAY DEPTH]
A.EG DECAY
A.EG SUSTAIN
A.EG RELEASE
EG ATTACK
EG DECAY
EG INT
LFO RATE
LFO INT
MOD TIME
MOD DEPTH
REVERB TIME
REVERB DEPTH
DELAY TIME
DELAY TIME
[–100%...0%...+100%]
[GATE TIME...REVERB DEPTH]
[–100%...0%...+100%]
32