Table of Contents
Advertisement
4.
After the set number of steps have finished recording, the Motion Sequence will automati-
cally finish recording as well.
Follow steps 2 and on to record motion sequences for other knobs and switches. The number
of steps is set for each program. You can change the number of steps using the "Step Length"
(p.37) function in the SEQ EDIT mode.
Deleting a motion sequence
You can delete one of the previously recorded motion sequences from "MOTION CLEAR (1...4)"
(p.38) in SEQ EDIT mode.
To delete all motion sequences at once, use "Motion Clear" (p.38) in SEQ CLEAR, SEQ
Tip:
EDIT mode.
1
2
3
4
1.
Press the EDIT MODE button a number of times to select SEQ EDIT mode.
2.
Press button 10 to enter MOTION CLEAR.
While the SHIFT button is pressed, the MOTION VIEW screen will be displayed, where
Tip:
you can see the graphics for the motion sequences you have recorded.
3.
Press button 10 a number of times to select the motion sequence to delete.
4.
Turn the PROGRAM/VALUE knob to select "CLEAR...?", and press the WRITE button.
The selected motion sequence will be deleted.
5.
Press the EXIT button.
5
6
7
8
9
10
11
2, 3
1
12
13
14
15
16
27
4
5
Hide quick links:
Advertisement
Table of Contents
