Maintenance - Genie S-60 TRAX Operator's Manual

Operator's Manual

Maintenance

Maintenance
Observe and Obey:

Only routine maintenance items specified in
this manual shall be performed by the
operator.

Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.

Dispose of material in accordance with
governmental regulations.

Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Indicates that a cold engine is required
before performing this procedure.
58
® ®
S -60 XC™ • S -65 XC™ • S
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off.
1 Check the oil level dipstick. Add oil as needed.
Deutz 2011 L03i Engine
Oil type
Oil type - cold conditions
Deutz TD2.9 Engine
Oil type
Oil type - cold conditions
Diesel Fuel Requirements
Satisfactory engine performance is dependent on
the use of a good quality fuel. The use of a good
quality fuel will give the following result: long
engine life and acceptable exhaust emissions
levels.
Minimum diesel fuel requirements for each engine
are listed below.
Deutz 2011 L03i Engine
Fuel Type
Deutz TD2.9 Engine
Fuel Type
® ®
-60 TRAX™ • S -65 TRAX™
First Edition • Second Printing
15W-40
15W-40
Low Sulfur Diesel (LSD)
Low Sulfur Diesel (LSD)
Part No. 1286582GT
5W-40
5W-30