17.7
SENSORS
17.7.3.1
Ambient Air Temperature Sensor Installation
Install the AAT Senaor where ambient air temperature can be read. A protected location on the
frame rails where it will not be splattered with dirt and grime and is removed from any heat source
such as exhaust is preferred. See Figure 17-22 for AAT Sensor installation.
Figure 17-22
Ambient Air Temperature Sensor Installation
The parameter for the AAT Sensor are listed in Table 17-23.
Parameter Group
Ambient Air Temp
31
Sensor Enable
MID for Ambient
31
Table 17-23
Ambient Air Temperature Sensor Parameters
17-42
Parameter
Options
0 – Not Available
1 – Hardwired
2 – Reserved for
J1939
3 – J1587
4 – ECAN
0 — 255
Air Temp
Default
0 – Not Available
VEPS, DRS
0
VEPS, DRS
All information subject to change without notice.
Copyright © 2007 DETROIT DIESEL CORPORATION
Access