Hot-Key-Command Shortcuts - Belkin OmniView F1DP108Gea User Manual

Using the Switch from a Local Console

Hot-Key-Command Shortcuts

Below is a complete list of hot-key commands that can be used for your Switch:
Command
Scroll Lock, Scroll Lock,
Scroll Lock, Scroll Lock,
Scroll Lock, Scroll Lock,
Page Up
Scroll Lock, Scroll Lock,
Page Down
Scroll Lock, Scroll Lock, Y
Scroll Lock, Scroll Lock,
Y, X
Scroll Lock, Scroll Lock,
Space Bar, F10
Scroll Lock, Scroll Lock,
Space Bar
Scroll Lock, Scroll Lock, F4
Note: You will have approximately five seconds to complete each
hot-key sequence.
66
Function
↑
Switch to PREVIOUS ACTIVE port
↓
Switch to NEXT ACTIVE port
Switch to PREVIOUS BANK (By default,
selects first active port on the BANK)
Switch to NEXT BANK (By default, selects first
active port on the BANK)
Directly switches to PORT Y on BANK 00
(single-switch configuration) (Y=01 to 16)
Directly switches to PORT Y on BANK X
(daisy-chain configuration) (X=00 to 15),
(Y=01 to 16)
Monitor DDC2 (identifies monitor settings)
Activate OSD
Enable AutoScan mode (refer to AutoScan
button)