Belkin OmniView F1DP108Gea User Manual page 63

Using the Switch from a Local Console
With a daisy-chain switch configuration, you can switch between BANKs (KVM
switches) by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the
previous BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to
the next BANK.
With a daisy-chain switch configuration, you can switch directly to any port on
any BANK by pressing "Scroll Lock", "Scroll Lock", BANK address, and the port
number. For example, if you press "Scroll Lock", "Scroll Lock", "03", "05", the
server on BANK 03, port 5 will become active.
Note: You will have approximately five seconds to complete each
hot-key sequence.
See page 65 for instructions on how to change the hot-key-initiator key.
1
2
3
4
5
6
7
8
9
10
59