Local Installation; Pre-Configuration - Belkin OmniView F1DP108Gea User Manual

Local Installation

Pre-Configuration

CAT5 Cables
Server Interface
Modules
Where to place the Switch:
The enclosure of the Switch is designed for stand-alone or rack-mount
configuration. The Switch can be mounted to a standard 19-inch server rack
using the included rack-mount brackets and screws.
Consider the following when deciding where to place the Switch:
• whether or not you intend to use the front-panel port selectors
• the lengths of the cables attached to your keyboard, monitor, and mouse
• the location of your servers in relation to your console
• the lengths of the cables you use to connect your servers to the Switch
Local Console
User
(Typical Switch configuration)
OmniView SMB
KVM-over-IP Switch
PS/2, USB and
SUN servers SUN servers
LAN/WAN
1
2
3
4
5
6
7
8
9
10
11