Scan Time; Admin Password - Belkin OmniView F1DP108Gea User Manual

Using the Switch from a Local Console
Function/Help-Page Keyboard Commands
Command
F4
↑↓
Insert
Esc
F10
Space
Scan
This specifies whether the AutoScan feature is enabled or not. To enable or
disable the AutoScan feature, use the arrow keys to navigate to the Scan field
and press the space bar.

Scan Time

This specifies the amount of time the Switch remains on a server before switching
to the next server while in AutoScan mode. You may set the scan-time interval
to anywhere between 1 and 99 seconds. To change the scan time, use the arrow
keys to navigate to the Scan Time field, and type in the desired time interval
(in seconds).
Security
This feature allows you to enable an administrator password to prevent
unauthorized users from accessing the OSD. To enable or disable the Security
feature, use the arrow keys to navigate to the Security field and press the
space bar.
Note: It is recommended that you do not enable local security if you will be
accessing the remote session often.

Admin Password

This allows you to specify the administrator password needed to access the OSD
when the Security feature is enabled. To set the password, use the arrow keys to
navigate to the Admin-Password field and type in the desired password. You may
use up to eight uppercase characters for the password. Password characters are
not case-sensitive. Press "Esc" or use the arrow keys to navigate to fields and
save the password. Use the "Back Space" key to erase the password.
64
Function
Initiate AutoScan
Navigate to the next field
Highlight field for editing
Return to the main OSD menu
Program Monitor-DDC2 settings to all Server
Interface Modules
Change options for selected field