System Defaults; Table 1-2. System Defaults - SMC Networks 100BASE-TX Management Manual

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file should be set as
the startup configuration file (page 3-19).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication
Web Management
SNMP

Table 1-2. System Defaults

Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from Normal
Exec Level
RADIUS Authentication
TACACS Authentication
802.1x Port Authentication
HTTPS
SSH
Port Security
IP Filtering
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Port Number
Community Strings
Traps
System Defaults
Default
9600
8
1
none
0 (disabled)
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Enabled
80
Enabled
443
"public" (read only)
"private" (read/write)
Authentication traps: enabled
Link-up-down events: enabled
1
1-5