Figure 3-53. Configuring A Dynamic Address Table - SMC Networks 100BASE-TX Management Manual

3
Configuring the Switch
Web – Click Address Table, Dynamic Addresses. Specify the search type (i.e., mark
the Interface, MAC Address, or VLAN checkbox), select the method of sorting the
displayed addresses, and then click Query.

Figure 3-53. Configuring a Dynamic Address Table

CLI – This example also displays the address table entries for port 1.
Console#show mac-address-table interface ethernet 1/1
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/ 1 00-E0-29-94-34-DE
Eth 1/ 1 00-20-9C-23-CD-60
Console#
3-88
Vlan Type
1 Delete-on-reset
2 Learned
4-131