To Configure A Device Via The Local User Interface - Siemens SITRANS LR560 Operating Instructions Manual

Key functions in Edit mode
Key Name
UP or
DOWN
arrow
RIGHT
arrow
LEFT
arrow
Clear
Decimal
point
Plus or
minus sign
Numeral
to

To configure a device via the local user interface

Notes:
• Completing the last step of the Quick Start via the local user interface places the
RESOURCE block (RES) and Level Transducer Block (LTB) in
• AIFB 1 and AIFB 2 will remain Out of Service (as displayed on the LCD). These blocks
can only be configured and scheduled using a network configuration tool. For more
details, refer to manual
Configure the device via the Quick Start Wizard.
Quick Start Wizard via the LDI push buttons
• See
Quick Start Wizard via the handheld programmer
• See
7ML19985LY01
Function
Selecting
Scrolls to item.
options
Alpha-
- Increments or decrements digits
Numeric
- Toggles plus and minus sign
editing
Selecting - Accepts the data (writes the parameter)
options - Changes from Edit to Navigation mode
- Moves cursor one space to the right
Numeric
- or with cursor on Enter sign, accepts the data and changes
editing
from Edit to Navigation mode
Selecting
Cancels Edit mode without changing the parameter
options
- Moves cursor to plus/minus sign if this is the first key pressed
Numeric
- or moves cursor one space to the left.
editing
- or with cursor on Enter sign, cancels the entry
Numeric
Erases the display.
editing
- In Edit mode, enters a decimal point.
Numeric
- In Parameter View, press
editing
parameter, and create custom Secondary Value to be dis-
played in secondary region of LCD.
Numeric
Changes the sign of the entered value.
editing
Numeric
Enters the corresponding character.
editing
Foundation Fieldbus for Level instruments (7ML19985MP01)
SITRANS LR560 (FF) – OPERATING INSTRUCTIONS
to store menu path to that
Automatic
mode.
on page 36
on page 36
.
Page 35