Adding A New Device; Electronic Device Description (Edd); Startup - Siemens SITRANS LR560 Operating Instructions Manual

Adding a new device

Electronic Device Description (EDD)

SITRANS LR560 requires the EDD for AMS Device Manager version 9.0.
Note:
Check the product page of our website at: www.siemens.com/LR560, under Support >
Software Downloads, for the latest version of EDD: SITRANS LR560 FF - Foundation
Fieldbus - AMS V9.0.
1) Check that you have the latest version of the EDD for AMS Device Manager that
matches the firmware revision of your device. (See Firmware Revision (2.2.2.) on
page 90 to access it via the local user interface). If necessary download the EDD
from the product page listed above.
2) Save the files to your computer, and extract the zipped file to an easily accessed
location.
3) Launch AMS Device Manager – Add Device Type, browse to the unzipped EDD file
and select it.
4) If desired, enter a new device tag. The device is shipped with a unique tag,
consisting of a manufacturer id and serial number
the device tag to make the device operational.
To change Device Tag:
a) Launch AMS Device Manager – AMS Device Manager.
b) From Device Connection View, right click on the FF Network icon and select
Rebuild Hierarchy.
c) Right click on the device icon, and choose Rename from the menu.
d) Enter a device tag and press Enter.
The Device Tag described above is distinct from the Tag that describes each block
Note:
type (located in the

Startup

1) Launch AMS Device Manager
a) Launch AMS Device Manager – AMS Device Manager.
b) From Device Connection View, right click on the FF Network icon and select
Rebuild Hierarchy.
c) If you wish to rename the device, right-click on the device icon and select
Rename from the menu, enter a new device tag, and click Enter.
d) Double-click the device icon. The Configure/Setup menu opens at the device
Identification dialog window. At initial startup, the Block Status is Out of
Service.
1)
The device tag is read-only via local operation.
Page 44 SITRANS LR560 (FF) – INSTRUCTION MANUAL
Identification
folder of each block).
1)
. It is not necessary to change
7ML19985LY01