The "swing-away" trunk support can be turned sidewards in
order to be out of the way when the user is moving in to or
out of the wheelchair.
CAUTION!
Risk of pinching
– The cover on the trunk support arm must always be
on when the chair is in use.
5.8 Adjusting the drip stand
The rod of the drip stand must always be placed in a vertical
position, i.e in a 90 degree angle to the ground, no matter
the position of the backrest or the wheelchair.
90°
Height
A
Loosen the lever A.
1.
2.
Adjust the drip stand to the desired height.
3.
Re-tighten the lever A.
1488727-G
90°
Angle
A
Loosen the lever A.
1.
2.
Adjust to the desired angle.
Re-tighten the lever A.
3.
5.9 Anti-tip device
For active position B, press the spring-loaded buttons A.
1.
2.
Raise or lower the anti-tip device.
Ensure that the spring-loaded buttons A pop out into place
3.
properly in their new position.
4.
For transport position C, fold the anti-tip device under the
wheelchair by pressing the spring-loaded buttons A.
5.
Turn the anti-tip device to the required position.
Ensure that the buttons A pop out again into position.
6.
Never forget to activate the anti-tip devices.
The anti-tip device also acts as a step tube. It is
height-adjustable and easy to adjust.
5.10 Azalea Base — seat attachment
There are four options how to attach a seat to the Azalea base:
•
Directly on the seat brackets.
•
On a seat plate.
•
On a seat plate with a wedge.
•
With the H-bracket.
Contact your Invacare dealer for more information.
Accessories
27